@misc{10498/22138,
year = {2019},
month = {10},
url = {http://hdl.handle.net/10498/22138},
abstract = {Light alloy machining is a widely implemented process that is usually used in the presence
of cutting fluids to reduce wear and increase tool life. The use of coolants during machining presents
negative environmental impacts, which has increased interest in reducing and even eliminating their
use. In order to obtain ecofriendly machining processes, it will be necessary to suppress the use of
cutting fluids, in a trend called “dry machining”. This fact forces machines to work under aggressive
cutting conditions, producing adhesion wear that a ects the integrity of the parts’ surfaces. This
study describes cutting tool wear mechanisms in machining of UNS A92024 samples under dry
cutting conditions. Energy dispersive spectroscopy (EDS) analysis shows the di erent compositions
of the adhered layers. Roughness is also positively a ected by the change of the cutting geometry
produced in the tool.},
publisher = {MDPI},
keywords = {tool wear},
keywords = {aluminum alloys},
keywords = {adhesion; turning},
title = {Study of the Tool Wear Process in the Dry Turning of Al–Cu Alloy},
doi = {10.3390/met9101094},
author = {Batista Ponce, Moisés and Sol Illana, Irene del and Ramírez Peña, Magdalena and Salguero Gómez, Jorge and Gómez Parra, Álvaro},
}