@inbook{10498/30784, year = {2021}, url = {http://hdl.handle.net/10498/30784}, abstract = {En este capítulo se tratarán dos procesos hidrotermales principales: 1) Licuefacción hidrotermal (LHT), es decir, una combinación de despolimerización térmica y proceso de recombinación a temperatura moderada (<350ºC) y presión media (<150 bar), útil para convertir orgánicos o biomasa húmeda en un producto líquido llamado “crudo” o “biocrudo”, que puede usarse como combustible sostenible en lugar de combustibles fósiles. 2) Oxidación en agua supercrítica (OASC), basada en la oxidación completa de compuestos orgánicos en medio acuoso en condiciones supercríticas (>374ºC y 220 bar), ya que es un proceso altamente exotérmico que libera una gran cantidad de calor y que genera energía limpia. efluentes. Ambos procesos están en estudio con vistas a gestionar su escalamiento como alternativa a otros procesos convencionales (pirólisis, incineración, tratamientos biológicos, etc.) para el tratamiento de diferentes materiales: celulosa, residuos agroalimentarios, tensioactivos y otros. Las tecnologías hidrotermales requieren tiempos de residencia bastante cortos (no más de unos pocos minutos en cualquier caso) y pueden aplicarse a la producción tanto de energía sostenible como de productos químicos valiosos. Con base en los estudios que se pueden encontrar en la literatura, pretendemos presentar algunos de los puntos clave de estas prometedoras tecnologías y también su estado de desarrollo a nivel mundial.}, abstract = {Two main hydrothermal processes will be dealt with in this chapter: 1) Hydrothermal liquefaction (HTL), that is, a combination of thermal depolymerization and recombination process under moderate temperature (<350ºC) and medium pressure (<150 bar), useful to convert organics or wet biomass into a liquid product so called “crude” or “bio-oil”, that can be used as a sustainable fuel instead of fossil fuels. 2) Supercritical water oxidation (SCWO), based on the complete oxidation of organic compounds in an aqueous medium under supercritical conditions (>374ºC and 220 bar), since it is a highly exothermal process that releases a huge amount of heat and that generates clean effluents. Both processes are under study in view to manage their scaling-up as an alternative to other conventional processes (pyrolysis, incineration, biological treatments, etc) for the treatment of different materials: cellulose, agrifood wastes, surfactants and others. Hydrothermal technologies require rather short residence times (no more than a few minutes in any case) and can be applied to the production of both sustainable energy and valuable chemicals. Based on the studies that can be found in the literature, we intend to present some of the key points of these promising technologies and also its development status worldwide.}, organization = {Junta de Andalucía (Proyecto FEDER-UCA18-108297)}, publisher = {Elsevier}, keywords = {Hydrothermal liquefaction}, keywords = {supercritical water oxidation}, keywords = {Biomass}, keywords = {organic waste waters}, keywords = {bio-oil}, keywords = {Cellulosic wastes}, keywords = {heat recovery}, title = {Application of hydrothermal processes to biomass and organic wastewaters to produce sustainable energy}, doi = {10.1016/B978-0-323-91093-4.00004-4}, author = {Portela Miguélez, Juan Ramón and García Jarana, María Belén and Sánchez Oneto, Jezabel and Benmakhlouf, Nadjiba and Outili, Nawel and Meniai, Abdeslam-Hassen}, }