Show simple item record

dc.contributor.authorBatista Ponce, Moisés 
dc.contributor.authorSol Illana, Irene del 
dc.contributor.authorRamírez Peña, Magdalena 
dc.contributor.authorSalguero Gómez, Jorge 
dc.contributor.authorGómez Parra, Álvaro 
dc.contributor.otherIngeniería Mecánica y Diseño Industriales_ES
dc.date.accessioned2020-01-21T09:05:08Z
dc.date.available2020-01-21T09:05:08Z
dc.date.issued2019-10
dc.identifier.issn2075-4701
dc.identifier.urihttp://hdl.handle.net/10498/22138
dc.description.abstractLight alloy machining is a widely implemented process that is usually used in the presence of cutting fluids to reduce wear and increase tool life. The use of coolants during machining presents negative environmental impacts, which has increased interest in reducing and even eliminating their use. In order to obtain ecofriendly machining processes, it will be necessary to suppress the use of cutting fluids, in a trend called “dry machining”. This fact forces machines to work under aggressive cutting conditions, producing adhesion wear that a ects the integrity of the parts’ surfaces. This study describes cutting tool wear mechanisms in machining of UNS A92024 samples under dry cutting conditions. Energy dispersive spectroscopy (EDS) analysis shows the di erent compositions of the adhered layers. Roughness is also positively a ected by the change of the cutting geometry produced in the tool.es_ES
dc.formatapplication/pdfes_ES
dc.language.isoenges_ES
dc.publisherMDPIes_ES
dc.rightsAtribución 4.0 Internacional*
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/*
dc.sourceMetals 2019, 9(10), 1094es_ES
dc.subjecttool weares_ES
dc.subjectaluminum alloyses_ES
dc.subjectadhesion; turninges_ES
dc.titleStudy of the Tool Wear Process in the Dry Turning of Al–Cu Alloyes_ES
dc.typejournal articlees_ES
dc.rights.accessRightsopen accesses_ES
dc.identifier.doi10.3390/met9101094


Files in this item

This item appears in the following Collection(s)

Show simple item record

Atribución 4.0 Internacional
This work is under a Creative Commons License Atribución 4.0 Internacional