Show simple item record

dc.contributor.authorAlmengló Cordero, Fernando 
dc.contributor.authorRamírez Muñoz, Martín 
dc.contributor.authorCantero Moreno, Domingo 
dc.contributor.otherIngeniería Química y Tecnología de Alimentoses_ES
dc.date.accessioned2021-02-01T12:22:21Z
dc.date.available2021-02-01T12:22:21Z
dc.date.issued2019-09
dc.identifier.issn2305-7084
dc.identifier.urihttp://hdl.handle.net/10498/24376
dc.description.abstractIn this study, a pilot biotrickling filter (BTF) was installed in a wastewater treatment plant to treat real biogas. The biogas flow rate was between 1 and 5 m3·h−1 with an H2S inlet load (IL) between 35.1 and 172.4 gS·m−3·h−1. The effects of the biogas flow rate, trickling liquid velocity (TLV) and nitrate concentration on the outlet H2S concentration and elimination capacity (EC) were studied using a full factorial design (33). Moreover, the results were adjusted using Ottengraf’s model. The most influential factors in the empirical model were the TLV and H2S IL, whereas the nitrate concentration had less influence. The statistical results showed high predictability and good correlation between models and the experimental results. The R-squared was 95.77% and 99.63% for the ‘C model’ and the ‘EC model’, respectively. The models allowed the maximum H2S IL (between 66.72 and 119.75 gS·m−3·h−1) to be determined for biogas use in a combustion engine (inlet H2S concentration between 72 and 359 ppmV). The ‘C model’ was more sensitive to TLV (–0.1579 (gS·m−3)/(m·h−1)) in the same way the ‘EC model’ was also more sensitive to TLV (4.3303 (gS·m−3)/(m·h−1)). The results were successfully fitted to Ottengraf’s model with a first-order kinetic limitation (R-squared above 0.92). © 2019 by the authors. Licensee MDPI, Basel, Switzerland.es_ES
dc.formatapplication/pdfes_ES
dc.language.isoenges_ES
dc.publisherMDPIes_ES
dc.rightsAtribución 4.0 Internacional*
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/*
dc.sourceChemEngineering 2019, 3(3), 66es_ES
dc.subjecthydrogen sulfidees_ES
dc.subjectanoxic biotrickling filteres_ES
dc.subjectbiogases_ES
dc.subjectOttengraf’s modeles_ES
dc.subjectopen polyurethane foames_ES
dc.subjectresponse surface methodologyes_ES
dc.titleApplication of response surface methodology for H2S removal from biogas by a pilot anoxic biotrickling filteres_ES
dc.typejournal articlees_ES
dc.rights.accessRightsopen accesses_ES
dc.identifier.doi10.3390/chemengineering3030066


Files in this item

This item appears in the following Collection(s)

Show simple item record

Atribución 4.0 Internacional
This work is under a Creative Commons License Atribución 4.0 Internacional