Show simple item record

dc.contributor.authorBañón García, Fermín 
dc.contributor.authorSambruno Ladrón de Guevara, Alejandro 
dc.contributor.authorBatista Ponce, Moisés 
dc.contributor.authorSimonet, Bartolomé
dc.contributor.authorSalguero Gómez, Jorge 
dc.contributor.otherIngeniería Mecánica y Diseño Industriales_ES
dc.date.accessioned2021-09-02T11:26:06Z
dc.date.available2021-09-02T11:26:06Z
dc.date.issued2021-11
dc.identifier.issn0020-7403
dc.identifier.urihttp://hdl.handle.net/10498/25280
dc.description.abstractThe bonding of Carbon Fibre Reinforced ThermoPlastic composites (CFRTP) and steel is of great interest nowadays. Nevertheless, the difference in machinability between dissimilar materials requires a specific machining process. Abrasive water jet machining is a flexible and environmentally friendly technology that can machine dissimilar materials at the same time with good results. However, due to the characteristics of the process and materials, geometrical defects such as taper angle can be caused by the loss of kinetic energy. In this research, the study of the final geometry in abrasive waterjet machining of a hybrid CFRTP/Steel structure. A new methodology for the evaluation of taper angle with high accuracy has been developed through image processing. In addition, the surface quality in terms of Ra and Rz has been assessed. A potential-type trend between taper and hydraulic pressure has been established for both materials. Minimum taper values between 1.5° and 5° have been obtained for both materials and stacking configurations with a combination of a hydraulic pressure of 420 MPa, an abrasive mass flow of 225 g/min and a traverse speed of 50 mm/min. © 2021 The Author(s)es_ES
dc.formatapplication/pdfes_ES
dc.language.isoenges_ES
dc.publisherELSEVIERes_ES
dc.rightsAtribución 4.0 Internacional*
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/*
dc.sourceInternational Journal of Mechanical Sciences 210 (2021) 106748es_ES
dc.subjectAWJMes_ES
dc.subjectGeometrical defectes_ES
dc.subjectHybrid structurees_ES
dc.subjectMachininges_ES
dc.subjectTaper anglees_ES
dc.titleEvaluation of geometrical defects in AWJM process of a hybrid CFRTP/Steel structurees_ES
dc.typejournal articlees_ES
dc.rights.accessRightsopen accesses_ES
dc.identifier.doi10.1016/j.ijmecsci.2021.106748


Files in this item

This item appears in the following Collection(s)

Show simple item record

Atribución 4.0 Internacional
This work is under a Creative Commons License Atribución 4.0 Internacional