Show simple item record

dc.contributor.authorRodríguez Parada, María Lucía 
dc.contributor.authorRosa Silva, Sergio de la 
dc.contributor.authorMayuet Ares, Pedro Francisco 
dc.contributor.otherIngeniería Mecánica y Diseño Industriales_ES
dc.date.accessioned2021-10-29T07:08:12Z
dc.date.available2021-10-29T07:08:12Z
dc.date.issued2021-08
dc.identifier.issn2073-4360
dc.identifier.urihttp://hdl.handle.net/10498/25665
dc.description.abstractThe design of products with elastic properties is a paradigm for design engineers because the properties of the material define the correct functionality of the product. Fused filament fabrication (FFF) allows for the printing of products in thermoplastic polyurethanes (TPU). Therefore, it offers the ability to design elastic products with the freedom of forms that this technology allows and also with greater variation of elastic properties than with a conventional process. The internal structures and the variation in thickness that can be used facilitate the design of products with different elastic realities, producing variations in the elasticity of the product with the same material. This work studies the influence of the variation of internal density as a function of basic geometries in order to quantify the difference in elasticity produced on a product when it is designed. Likewise, a case study was carried out with the creation of a fully elastic computer keyboard printed in 3D. The specimens were subjected to compression to characterize the behavior of the structures. The tests showed that the elasticity varies depending on the orientation and geometry, with the highest compressive strength observed in the vertical orientation with 80% lightening. In addition, the internal lightening increases the elasticity progressively but not uniformly with respect to the solid geometry, and also the flat faces favour the reduction in elasticity. This study classifies the behavior of TPU with the aim of being applied to the design and manufacture of products with specific properties. In this work, a totally flexible and functional keyboard was designed, obtaining elasticity values that validate the study carried out.es_ES
dc.description.sponsorshipThe APC was funded by University of Cadiz (programme for the promotion and encouragement of research and transfer).es_ES
dc.formatapplication/pdfes_ES
dc.language.isoenges_ES
dc.publisherMDPIes_ES
dc.rightsAtribución 4.0 Internacional*
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/*
dc.sourcePolymers 2021, 13(15), 2519es_ES
dc.subjectflexible productses_ES
dc.subjectelastic productses_ES
dc.subject3D printinges_ES
dc.subjectadditive manufacturinges_ES
dc.subjectTPUes_ES
dc.subjectindustrial designes_ES
dc.subjectFFFes_ES
dc.subjectproduct designes_ES
dc.subjectcustomization productses_ES
dc.titleInfluence of 3D-Printed TPU Properties for the Design of Elastic Productses_ES
dc.typejournal articlees_ES
dc.rights.accessRightsopen accesses_ES
dc.identifier.doi10.3390/polym13152519


Files in this item

This item appears in the following Collection(s)

Show simple item record

Atribución 4.0 Internacional
This work is under a Creative Commons License Atribución 4.0 Internacional