Show simple item record

dc.contributor.authorMontes Herrera, Antonio 
dc.contributor.authorValor López, Diego 
dc.contributor.authorDelgado, Laura
dc.contributor.authorPereyra López, Clara María 
dc.contributor.authorMartínez de la Ossa Fernández, Enrique José 
dc.contributor.otherIngeniería Química y Tecnología de Alimentoses_ES
dc.date.accessioned2022-03-29T12:13:16Z
dc.date.available2022-03-29T12:13:16Z
dc.date.issued2022-02
dc.identifier.issn2073-4360
dc.identifier.urihttp://hdl.handle.net/10498/26535
dc.description.abstractConjugated polymers are biomaterials with high conductivity characteristics because of their molecular composition. However, they are too rigid and brittle for medical applications and therefore need to be combined with non-conductive polymers to overcome or lessen these drawbacks. This work has, consequently, focused on the development of three-dimensional scaffolds where conductive and non-conductive polymers have been produced by combining polycaprolactone (PCL) and polyaniline (PANI) by means of supercritical CO2 foaming techniques. To evaluate their therapeutic potential as implants, a series of experiments have been designed to determine the most influential variables in the production of the three-dimensional scaffolds, including temperature, pressure, polymer ratio and depressurization rate. Internal morphology, porosity, expansion factor, PANI loads, biodegradability, mechanical and electrical properties have been taken as the response variables. The results revealed a strong influence from all the input variables studied, as well as from their interactions. The best operating conditions tested were 70 degrees C, 100 bar, a ratio of 5:1 (PCL:PANI), a depressurization rate of 20 bar/min and a contact time of 1 h.es_ES
dc.description.sponsorshipThis research was funded by Spanish Ministry of Economy, Industry and Competitiveness: PID2020-116229RB-I00.es_ES
dc.formatapplication/pdfes_ES
dc.language.isoenges_ES
dc.publisherMDPIes_ES
dc.rightsAtribución 4.0 Internacional*
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/*
dc.sourcePolymers 2022, 14(3), 488es_ES
dc.subjectpolycaprolactonees_ES
dc.subjectpolyanilinees_ES
dc.subjectsupercritical CO2 foaminges_ES
dc.subjectscaffoldses_ES
dc.subjectconjugated polymerses_ES
dc.titleAn Attempt to Optimize Supercritical CO2 Polyaniline-Polycaprolactone Foaming Processes to Produce Tissue Engineering Scaffoldses_ES
dc.typejournal articlees_ES
dc.rights.accessRightsopen accesses_ES
dc.identifier.doi10.3390/polym14030488
dc.relation.projectIDinfo:eu-repo/grantAgreement/AEI/Plan Estatal de Investigación Científica y Técnica y de Innovación 2017-2020/PID2020-116229RB-I00/ES/DISPOSITIVOS POLIMERICOS FUNCIONALES MEDIANTE PROCESOS A ALTA PRESION PARA APLICACIONES BIOMEDICAS/es_ES


Files in this item

This item appears in the following Collection(s)

Show simple item record

Atribución 4.0 Internacional
This work is under a Creative Commons License Atribución 4.0 Internacional