Show simple item record

dc.contributor.authorTorres Herrera, Sandra 
dc.contributor.authorGonzález Cortés, José Joaquín 
dc.contributor.authorAlmengló Cordero, Fernando 
dc.contributor.authorYeste Siguenza, María del Pilar 
dc.contributor.authorRamírez Muñoz, Martín 
dc.contributor.authorCantero Moreno, Domingo 
dc.contributor.otherCiencia de los Materiales e Ingeniería Metalúrgica y Química Inorgánicaes_ES
dc.contributor.otherIngeniería Química y Tecnología de Alimentoses_ES
dc.date.accessioned2022-06-10T08:11:07Z
dc.date.available2022-06-10T08:11:07Z
dc.date.issued2022-09
dc.identifier.isbn10.1016/j.fuel.2022.124367
dc.identifier.issn0016-2361
dc.identifier.urihttp://hdl.handle.net/10498/26923
dc.description.abstractElemental sulfur is an interesting byproduct obtained in the anoxic biodesulfurization of biogas. However, the colloidal properties of this biogenic elemental sulfur (S0) make its efficient recovery difficult. The present study investigated the flocculation of S0 produced in an anoxic bioreactor for biogas desulfurization using cationic (Sedifloc 40L4 C, Lizaflock 853 M), anionic (Innoflock 201) and non-ionic flocculants (NI-1009) and a coagulant (polyaluminum chloride). Cationic-type flocculants showed the highest flocculation efficiency, which led to its selection for further evaluation using the response surface methodology of the effects and interactions of its dose, stirring speed and pH on the biogenic sulfur flocculation rate. Optimum S0 flocculation conditions were observed using Lizaflock 853 M at a dose of 0.82 mg L−1, a stirring speed of 30 rpm and a pH of 8.0. A S0 flocculation rate of 97.05% was achieved for an initial concentration of 1730 mg S0 L−1. The Zeta potential of the settled sulfur particles increased after the flocculation process. © 2022 The Author(s)es_ES
dc.formatapplication/pdfes_ES
dc.language.isoenges_ES
dc.publisherELSEVIERes_ES
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 Internacional*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/*
dc.sourceFuel, Vol. 323es_ES
dc.subjectBiogenic sulfures_ES
dc.subjectFlocculationes_ES
dc.subjectOptimizationes_ES
dc.subjectResponse surface methodologyes_ES
dc.subjectTurbidityes_ES
dc.titleOptimization of biogenic sulfur flocculation from an anoxic desulfurization bioreactor using response surface methodologyes_ES
dc.typejournal articlees_ES
dc.rights.accessRightsopen accesses_ES
dc.identifier.doi10.1016/j.fuel.2022.124367
dc.relation.projectIDinfo:eu-repo/grantAgreement/Junta de Andalucía//FEDER-UCA18-106138es_ES


Files in this item

This item appears in the following Collection(s)

Show simple item record

Attribution-NonCommercial-NoDerivatives 4.0 Internacional
This work is under a Creative Commons License Attribution-NonCommercial-NoDerivatives 4.0 Internacional