Show simple item record

dc.contributor.authorVázquez Martínez, Juan Manuel 
dc.contributor.authorSalguero Gómez, Jorge 
dc.contributor.authorSol Illana, Irene del 
dc.contributor.otherIngeniería Mecánica y Diseño Industriales_ES
dc.date.accessioned2022-06-14T13:02:13Z
dc.date.available2022-06-14T13:02:13Z
dc.date.issued2022-09
dc.identifier.issn0263-4368
dc.identifier.urihttp://hdl.handle.net/10498/26947
dc.description.abstractLaser Surface Texturing (LST) is widely used to modify hard material surfaces improving their physic-chemical and mechanical properties. This technology is particularly relevant for tungsten carbides, a material that requires high complexity methods when other micro-machining processes are used. LST allows innovative cutting tool designs that improve the machining behavior and enlarge the cutting tool lifetime. This research analyses the influence of LST parameters on the track dimensions, roughness, microstructure, hardness, and lubricant retention ability of the modified surfaces. Twelve combinations of energy density of pulse and scanning speed created different geometrical patterns on WC-Co surfaces. LST parameters were related to specific shape and dimensions of the linear grooves. Energy density was proven as the most influential parameter for dimensional characteristics and roughness values. Specific channel morphologies increased the lubricant expansion area up to 50%, leading the lubricant to a linear track direction. Low scanning speed and high energy density also increased the surface hardness up to 20%. The surface composition was also modified. The thermal effect of the laser treatments and the non-protective atmosphere increased the oxygen on the surface and modified the WC-Co microstructure. However, the thermal affected zone is considerably low compared to other texturing processes. © 2022 The Authorses_ES
dc.description.sponsorshipThis work was supported by the Spanish Government ( MINECO/AEI/FEDER , Grant Project DPI2017–84935-R ).es_ES
dc.formatapplication/pdfes_ES
dc.language.isoenges_ES
dc.publisherELSEVIERes_ES
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 Internacional*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/*
dc.sourceInternational Journal of Refractory Metals and Hard Materials, Vol. 107es_ES
dc.subjectMicro-texturees_ES
dc.subjectCarbide tooles_ES
dc.subjectWC-Coes_ES
dc.subjectCutting fluidses_ES
dc.subjectLaser surface texturinges_ES
dc.subjectLubricationes_ES
dc.titleTexturing design of WC-Co through laser parameter selection to improve lubricant retention ability of cutting toolses_ES
dc.typejournal articlees_ES
dc.rights.accessRightsopen accesses_ES
dc.identifier.doi10.1016/j.ijrmhm.2022.105880
dc.relation.projectIDinfo:eu-repo/grantAgreement/AEI/Plan Estatal de Investigación Científica y Técnica y de Innovación 2013-2016/DPI2017-84935-R/ES/MEJORA DEL RENDIMIENTO FUNCIONAL DE SUPERFICIES MEDIANTE LA TEXTURIZACION A DIFERENTES ESCALAS/es_ES


Files in this item

This item appears in the following Collection(s)

Show simple item record

Attribution-NonCommercial-NoDerivatives 4.0 Internacional
This work is under a Creative Commons License Attribution-NonCommercial-NoDerivatives 4.0 Internacional