Show simple item record

dc.contributor.authorBergaliyeva, Saltanat
dc.contributor.authorSales Lérida, David 
dc.contributor.authorDelgado González, Francisco Javier 
dc.contributor.authorBolegenova, Saltanat
dc.contributor.authorMolina Rubio, Sergio Ignacio 
dc.contributor.otherCiencia de los Materiales e Ingeniería Metalúrgica y Química Inorgánicaes_ES
dc.date.accessioned2023-05-26T12:09:17Z
dc.date.available2023-05-26T12:09:17Z
dc.date.issued2022-12
dc.identifier.issn2073-4360
dc.identifier.urihttp://hdl.handle.net/10498/28696
dc.description.abstractIn the new transformation of 'Industry 4.0', additive manufacturing technologies have become one of the fastest developed industries, with polylactic acid (PLA) playing a significant role. However, there is an increasing amount of garbage generated during the printing process and after prototypes or end-of-life parts. Re-3D printing is one way to recycle PLA waste from fused filament fabrication. To do this process successfully, the properties of the waste mixture should be known. Previous studies have found that PLA degrades hydrolytically, but the time at which this process occurs for 3D printed products is not specified. This work aims to establish the baseline of the degradation kinetics of 3D printed PLA products to predict the service time until which these properties are retained. To achieve this, 3D printed specimens were thermally and hydrothermally aged during several time intervals. Thermal and mechanical properties were also determined. This study reveals that tensile strength decreases after 1344 h of hydrothermal ageing, simulating 1.5-2.5 years of real service time. PLA therefore has the same thermo-mechanical properties before reaching 1.5-years of age, so it could be recycled.es_ES
dc.formatapplication/pdfes_ES
dc.language.isoenges_ES
dc.publisherMDPIes_ES
dc.rightsAtribución 4.0 Internacional*
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/*
dc.sourcePolymers, Vol. 14, Núm. 23, 2022es_ES
dc.subjectpolylactic acides_ES
dc.subjectthermal aginges_ES
dc.subjecthydrothermal aginges_ES
dc.subject3D printinges_ES
dc.subjectadditive manufacturinges_ES
dc.subjectfused filament fabricationes_ES
dc.subjectrecyclabilityes_ES
dc.titleEffect of Thermal and Hydrothermal Accelerated Aging on 3D Printed Polylactic Acides_ES
dc.typejournal articlees_ES
dc.rights.accessRightsopen accesses_ES
dc.identifier.doi10.3390/polym14235256
dc.type.hasVersionVoRes_ES


Files in this item

This item appears in the following Collection(s)

Show simple item record

Atribución 4.0 Internacional
This work is under a Creative Commons License Atribución 4.0 Internacional