Show simple item record

dc.contributor.authorCabrera Correa, Leticia 
dc.contributor.authorGonzález Rovira, Leandro 
dc.contributor.authorOjeda López, Adrián 
dc.contributor.authorLópez Castro, Juan de Dios 
dc.contributor.authorBotana Pedemonte, Francisco Javier 
dc.contributor.otherCiencia de los Materiales e Ingeniería Metalúrgica y Química Inorgánicaes_ES
dc.contributor.otherIngeniería Mecánica y Diseño Industriales_ES
dc.date.accessioned2023-06-13T13:05:55Z
dc.date.available2023-06-13T13:05:55Z
dc.date.issued2023-04-05
dc.identifier.issn0010-938X
dc.identifier.urihttp://hdl.handle.net/10498/28812
dc.description.abstractThe effect of thermal ageing at 150 ºC on the corrosion behaviour of Scalmalloy® (Al-Mg-Sc-Zr) alloy additively manufactured by laser powder bed fusion (LPBF) is reported for the first time. Samples before and after the thermal treatment exhibit similar results on cyclic polarisation curves, electrochemical impedance measurements in 3.5 wt% NaCl, and tensile and hardness tests. However, electron microscopy characterisation reveals that the application of this temperature for sufficient time causes most of the grain limits to be decorated by Al3Mg2 particles which in turn provokes the sensitization of the alloy to intergranular corrosion processes due to microgalvanic couplinges_ES
dc.description.sponsorshipSEM and TEM data were obtained at SC-ICYT University of Cadiz. L.G.R. acknowledges support from the Programme for Attracting Talent of UCA and from IMEYMAT: Institute of Research on Electron Microscopy and Materials, UCA. L.C.C. and A.O.L. acknowledge support from UCA and Titania , Ensayos y Proyectos Industriales S.L for their predoctoral positions. The authors would also like to acknowledge Titania, Ensayos y Proyectos Industriales S.L. for the support in the achievements of this work.es_ES
dc.formatapplication/pdfes_ES
dc.language.isoenges_ES
dc.publisherElsevieres_ES
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 Internacional*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/*
dc.sourceCorrosion Science. Vol. 218, July 2023, 111166es_ES
dc.subjectAluminumes_ES
dc.subjectpolarizationes_ES
dc.subjectintergranular corrosiones_ES
dc.subjectSEMes_ES
dc.subjectStress corrosiones_ES
dc.subjectWeight losses_ES
dc.titleLocalized and stress corrosion cracking of sensitized Al-Mg-Sc-Zr alloy manufactured by laser powder bed fusiones_ES
dc.typejournal articlees_ES
dc.rights.accessRightsopen accesses_ES
dc.identifier.doi10.1016/j.corsci.2023.111166
dc.type.hasVersionVoRes_ES


Files in this item

This item appears in the following Collection(s)

Show simple item record

Attribution-NonCommercial-NoDerivatives 4.0 Internacional
This work is under a Creative Commons License Attribution-NonCommercial-NoDerivatives 4.0 Internacional