Show simple item record

dc.contributor.authorSun, Michael
dc.contributor.authorBlasco, Rodrigo
dc.contributor.authorNwodo, Julian
dc.contributor.authorMata Fernández, María de la 
dc.contributor.authorMolina Rubio, Sergio Ignacio 
dc.contributor.authorAjay, Akhil
dc.contributor.authorMonroy, Eva
dc.contributor.authorValdueza-Felip, Sirona
dc.contributor.authorNaranjo, Fernando B.
dc.contributor.otherCiencia de los Materiales e Ingeniería Metalúrgica y Química Inorgánicaes_ES
dc.date.accessioned2023-06-15T10:24:40Z
dc.date.available2023-06-15T10:24:40Z
dc.date.issued2022-10
dc.identifier.issn1996-1944
dc.identifier.urihttp://hdl.handle.net/10498/28831
dc.description.abstractAlxIn1-xN ternary semiconductors have attracted much interest for application in photovoltaic devices. Here, we compare the material quality of AlxIn1-xN layers deposited on Si with different crystallographic orientations, (100) and (111), via radio-frequency (RF) sputtering. To modulate their Al content, the Al RF power was varied from 0 to 225 W, whereas the In RF power and deposition temperature were fixed at 30 W and 300 degrees C, respectively. X-ray diffraction measurements reveal a c-axis-oriented wurtzite structure with no phase separation regardless of the Al content (x = 0-0.50), which increases with the Al power supply. The surface morphology of the AlxIn1-xN layers improves with increasing Al content (the root-mean-square roughness decreases from approximate to 12 to 2.5 nm), and it is similar for samples grown on both Si substrates. The amorphous layer (similar to 2.5 nm thick) found at the interface with the substrates explains the weak influence of their orientation on the properties of the AlxIn1-xN films. Simultaneously grown AlxIn1-xN-on-sapphire samples point to a residual n-type carrier concentration in the 10(20)-10(21) cm(-3) range. The optical band gap energy of these layers evolves from 1.75 to 2.56 eV with the increase in the Al. PL measurements of AlxIn1-xN show a blue shift in the peak emission when adding the Al, as expected. We also observe an increase in the FWHM of the main peak and a decrease in the integrated emission with the Al content in room-temperature PL measurements. In general, the material quality of the AlxIn1-xN films on Si is similar for both crystallographic orientations.es_ES
dc.formatapplication/pdfes_ES
dc.language.isoenges_ES
dc.publisherMDPIes_ES
dc.rightsAtribución 4.0 Internacional*
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/*
dc.sourceMaterials, Vol. 15, Núm. 20, 2022es_ES
dc.subjectAlInNes_ES
dc.subjectSi(100)es_ES
dc.subjectSi(111)es_ES
dc.subjectradio-frequency sputteringes_ES
dc.titleComparison of the Material Quality of AlxIn1-xN (x-0-0.50) Films Deposited on Si(100) and Si(111) at Low Temperature by Reactive RF Sputteringes_ES
dc.typejournal articlees_ES
dc.rights.accessRightsopen accesses_ES
dc.identifier.doi10.3390/ma15207373
dc.relation.projectIDinfo:eu-repo/grantAgreement/AEI/Plan Estatal de Investigación Científica y Técnica y de Innovación 2017-2020/RTI2018-101037-B-I00/ES/NITRUROS DEL GRUPO III PARA APLICACIONES ENERGETICAS/ es_ES
dc.type.hasVersionVoRes_ES


Files in this item

This item appears in the following Collection(s)

Show simple item record

Atribución 4.0 Internacional
This work is under a Creative Commons License Atribución 4.0 Internacional