Mostrar el registro sencillo del ítem

dc.contributor.authorBartsch, Heike
dc.contributor.authorLubov, Maksim
dc.contributor.authorKharlamov, Vladimir S.
dc.contributor.authorJiménez Ríos, Juan Jesús 
dc.contributor.otherCiencia de los Materiales e Ingeniería Metalúrgica y Química Inorgánicaes_ES
dc.date.accessioned2023-11-28T09:06:51Z
dc.date.available2023-11-28T09:06:51Z
dc.date.issued2022-12-02
dc.identifier.issn2051-672X
dc.identifier.urihttp://hdl.handle.net/10498/29675
dc.description.abstractPores are intrinsic defects of ceramic composites and influence their functional properties significantly. Their characterization is therefore a pivotal task in material and process optimization. It is demonstrated that polished section analysis allows for obtaining precise information on pore size, shape, area fraction, and homogeneous distribution. It is proven that laser scanning microscopy provides accurate height maps and is thus an appropriate technique for assessing surface features. Such data is used to compare areas with good and poor polishing results, and various surface parameters are evaluated in terms of their informative value and data processing effort. The material under investigation is a low temperature co-fired ceramic composite. Through statistical analysis of the data, the inclination angle was identified as an appropriate parameter to describe the polishing result. By using masked data, direct conclusions can be drawn about the leveling of load-bearing surface areas, which are crucial in photolithographic processing steps and bonding technology. A broad discussion of different defects based on the results contributes to a critical analysis of the potentials and obstacles of micromachining of low temperature cofired ceramic substrates.es_ES
dc.formatapplication/pdfes_ES
dc.language.isoenges_ES
dc.publisherInstitute of Physicses_ES
dc.rightsAtribución 4.0 Internacional*
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/*
dc.sourceSurface Topography: Metrology and Properties. Vol. 10, nº 4, December 2022, 045026es_ES
dc.subjectglass-ceramic compositees_ES
dc.subjectlaser scanning microscopyes_ES
dc.subjectlow temperature co-fired ceramicses_ES
dc.subjectLTCCes_ES
dc.subjectpolishinges_ES
dc.subjectpore analysises_ES
dc.subjectsurface analysises_ES
dc.titleCharacterization of pores in polished low temperature co-fired glass-ceramic composites for optimization of their micromachininges_ES
dc.typejournal articlees_ES
dc.rights.accessRightsopen accesses_ES
dc.description.physDesc15 páginases_ES
dc.identifier.doi10.1088/2051-672X/aca2c7
dc.type.hasVersionVoRes_ES


Ficheros en el ítem

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem

Atribución 4.0 Internacional
Esta obra está bajo una Licencia Creative Commons Atribución 4.0 Internacional