Show simple item record

dc.contributor.authorCano Santana, Patricio Iván
dc.contributor.authorColón, Joan
dc.contributor.authorRamírez Muñoz, Martín 
dc.contributor.authorLafuente, Javier
dc.contributor.authorGabriel, David
dc.contributor.authorCantero Moreno, Domingo 
dc.contributor.otherIngeniería Química y Tecnología de Alimentoses_ES
dc.date.accessioned2024-01-08T14:15:33Z
dc.date.available2024-01-08T14:15:33Z
dc.date.issued2018-02-03
dc.identifier.issn0959-6526
dc.identifier.urihttp://hdl.handle.net/10498/29903
dc.description.abstractBiogas desulfurization can be carried out by physical-chemical or biological technologies. Biological technologies are generally described as more environmentally friendly than physical-chemical techniques, although it is difficult to find studies in which the associated environmental burdens are compared. Therefore, the aim of the work described here was to perform a life cycle assessment to compare the environmental impact of four common desulfurization technologies for hydrogen sulfide removal from biogas produced in sewage treatment plants. The desulfurization technologies studied were aerobic biotrickling filtration, anoxic biotrickling filtration, caustic chemical scrubbing and adsorption on impregnated activated carbon. The environmental assessment was extended with a Capital Expenditures (CAPEX) and Operational Expense (OPEX) analysis. Furthermore, an extra scenario (no desulfurization with biogas combustion) was compared with biogas desulfurization by aerobic biofiltration coupled to energy valorization (best-case treatment scenario). Results indicate that biological technologies are much more favorable in most environmental impact categories than physicalchemical technologies and, as expected, are more favorable than the non-treatment scenario. In all desulfurization technologies the most contributing stage to the total environmental burdens was the daily desulfurization operation. The chemical scrubber was the worst scenario except for the “Climate Change”. In terms of the “Climate Change” (carbon dioxide equivalent emission), aerobic and anoxic desulfurization would emit 13.9 and 18.7 kg CO2 kg-1 S-H2S treated, respectively. The anoxic process could be improved to emit only 7.2 kg CO2 kg-1 S-H2S treated if the nitrate source was produced in a nitrification reactor built at the sewage treatment plant. Caustic chemical scrubber desulfurization and impregnated activated carbon desulfurization would emit 30.0 and 42.1 kg CO2 kg-1 S-H2S treated, respectively. To all impact categories, the contribution of sulfur compounds was less than 5%. The aerobic biotrickling filtration had the lower environmental impacts. However, the anoxic biotrickling filtration was the best approach if a nitrification reactor was already on-site.es_ES
dc.description.sponsorshipThe Spanish Government provided financial support to carry out the research work through the project CTM2012-37927-C03 “Monitoring, modelling and control towards the optimization of anoxic and aerobic desulfurizing biotrickling filters”. Department of Chemical, Biological and Environmental Engi neering (Universitat Autonoma de Barcelona) is a unit of Biochemical Engineering of the Xarxa de Referencia en Biotecnologia de Catalunya (XRB), Generalitat de Catalunya.es_ES
dc.formatapplication/pdfes_ES
dc.language.isoenges_ES
dc.publisherElsevier Ltdes_ES
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 Internacional*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/*
dc.sourceJournal of Cleaner Production 181 (2018) 663-674es_ES
dc.subjectBiogases_ES
dc.subjectLife-cycle assessmentes_ES
dc.subjectDesulfurizationes_ES
dc.subjectEnergy recoveryes_ES
dc.subjectEconomic analysises_ES
dc.titleLife Cycle Assessment of different physical-chemical and biological technologies for biogas desulfurization in sewage treatment plantses_ES
dc.typejournal articlees_ES
dc.rights.accessRightsopen accesses_ES
dc.identifier.doi10.1016/J.JCLEPRO.2018.02.018
dc.relation.projectIDinfo:eu-repo/grantAgreement/MINECO//CTM2012-37927-C03-03/ES/MONITORIZACION, MODELIZACION Y CONTROL PARA LA OPTIMIZACION DE BIOFILTROS PERCOLADORES DE DESULFURACION ANOXICOS Y AEROBIOS/ es_ES
dc.type.hasVersionAMes_ES


Files in this item

This item appears in the following Collection(s)

Show simple item record

Attribution-NonCommercial-NoDerivatives 4.0 Internacional
This work is under a Creative Commons License Attribution-NonCommercial-NoDerivatives 4.0 Internacional