Show simple item record

dc.contributor.authorGonzález-Álvarez, Rafael J.
dc.contributor.authorBellido Milla, Dolores 
dc.contributor.authorPinto Ganfornina, Juan José 
dc.contributor.authorMoreno Aguilar, Carlos 
dc.contributor.otherQuímica Analíticaes_ES
dc.date.accessioned2024-01-29T10:16:07Z
dc.date.available2024-01-29T10:16:07Z
dc.date.issued2018
dc.identifier.issn1364-5544
dc.identifier.issn0267-9477
dc.identifier.urihttp://hdl.handle.net/10498/30362
dc.description.abstractThe direct analysis of solvent bars used for silver micro-extraction from seawater samples by high resolution continuum source solid sampling graphite furnace atomic absorption spectroscopy (HR-CS-SS-GF-AAS) has been achieved. Three successive pyrolysis steps at 290 °C, 700 °C and 1000 °C were applied to ensure the elimination of the fumes released during the calcination of the bar prior to the atomization at 1800 °C. Silver micro-extraction with solvent bars was optimised by applying a multivariate strategy. The concentrations of the extracting agent (tri-isobutylphosphine sulphide), reextracting reagent (sodium thiosulfate) and nitrate were studied by using a central composite design based on the surface response methodology. The optimum values were 0.168 mol L-1, 0.033 mol L-1 and 0.159 mol L-1, respectively. Under these conditions, a stirring rate of 1000 rpm and an extraction time of 20 minutes were optimum. Additionally, the effect of chlorides and humic acids was also studied. The method exhibited a repeatability and reproducibility of 1.54% and 2.68%, respectively, with a limit of detection of 2.52 ng L-1 and a linear range up to 334 ng L-1. For the first time, an ultra-trace element (silver at the ng L-1 level) was pre-concentrated and determined in seawater by using a direct solid analysis-based method, simplifying the sample preparation process and avoiding its manipulation. The method was successfully applied to dissolved silver determination in real seawater samples after the micro-extraction process and was validated by comparison with the reference method of liquid-liquid extraction with APDC/DDDC and ICP-MS determination.es_ES
dc.formatapplication/pdfes_ES
dc.language.isoenges_ES
dc.publisherROYAL SOC CHEMISTRYes_ES
dc.sourceJournal of Analytical Atomic Spectrometry - 2018, Vol. 33 n. 11 pp. 1925-1931es_ES
dc.titleDetermination of silver in seawater by the direct analysis of solvent bars by high resolution continuum source solid sampling graphite furnace atomic absorption spectrometryes_ES
dc.typejournal articlees_ES
dc.rights.accessRightsclosed accesses_ES
dc.identifier.doi10.1039/C8JA00243F
dc.relation.projectIDinfo:eu-repo/grantAgreement/MINECO//CTM2013-47549-P/ES/NUEVOS SISTEMAS PARA LA CUANTIFICACION DE METALES TRAZA EN AGUAS BASADOS EN MICROSISTEMAS CAPILARES. AUNANDO EFICACIA, APLICACION Y SOSTENIBILIDADes_ES
dc.type.hasVersionVoRes_ES


Files in this item

This item appears in the following Collection(s)

Show simple item record