Show simple item record

dc.contributor.authorValerga Puerta, Ana Pilar 
dc.contributor.authorFernandez-Sanz, G.
dc.contributor.authorBañón García, Fermín 
dc.contributor.authorFernández Vidal, Severo Raúl 
dc.contributor.otherIngeniería Mecánica y Diseño Industriales_ES
dc.date.accessioned2024-05-02T09:08:08Z
dc.date.available2024-05-02T09:08:08Z
dc.date.issued2023
dc.identifier.issn1687-8140
dc.identifier.issn1687-8132
dc.identifier.urihttp://hdl.handle.net/10498/32062
dc.description.abstractThe durability and degradation of polymers is very important for product design in terms of material choice. The degradation behavior of two biodegradable thermoplastic materials manufactured by 3D printing, Enviro ABS and PLA, was studied. The action of the sun and seawater was simulated to find out how they affect the properties of these materials over a period of 8 weeks. The yield strength, maximum elongation, ultimate tensile strength, and microscopy were analyzed, as well as dimensions and mass changes. These biodegradable materials were studied to conclude whether there is an environmentally friendly alternative to traditional ABS, being one of the most widely used petroleum-based plastics in industry and in fused deposition modeling (FDM) or fused filament fabrication (FFF). PLA showed a weight loss and increase in ultimate tensile stress on degradation by sunlight and a prolonged decrease in ultimate tensile stress on degradation by seawater due to humidity absorption. In contrast, Enviro ABS does not show a noticeable difference between the beginning and the end of the test, which leads to the conclusion that Enviro ABS is a good alternative to conventional ABS without forgetting the environmental effects that are currently involved in the manufacture, recycling and composting of this type of material.es_ES
dc.formatapplication/pdfes_ES
dc.language.isoenges_ES
dc.publisherSAGE Publications Inc.es_ES
dc.rightsAtribución 4.0 Internacional*
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/*
dc.sourceAdvances in Mechanical Engineering - 2023, Vol. 15, n. 11, pp. 1-8es_ES
dc.subjectAdditive manufacturinges_ES
dc.subjectDegradationes_ES
dc.subjectDesignes_ES
dc.subjectEnvironmental manufacturinges_ES
dc.subjectPolymeres_ES
dc.subjectTensile testses_ES
dc.titleBiodegradable materials with FDM technology under the aging effect of solar and saltwater exposurees_ES
dc.typejournal articlees_ES
dc.rights.accessRightsopen accesses_ES
dc.description.physDesc8 páginases_ES
dc.identifier.doi10.1177/16878132231201297
dc.relation.projectIDSC-ICYTes_ES
dc.type.hasVersionVoRes_ES


Files in this item

This item appears in the following Collection(s)

Show simple item record

Atribución 4.0 Internacional
This work is under a Creative Commons License Atribución 4.0 Internacional