Show simple item record

dc.contributor.authorDiaz-Carrasco, Pilar
dc.contributor.authorMolines, Jorge
dc.contributor.authorGómez-Martín, M. Esther
dc.contributor.authorMedina, Josep
dc.contributor.otherIngeniería Industrial e Ingeniería Civiles_ES
dc.date.accessioned2024-05-08T09:58:16Z
dc.date.available2024-05-08T09:58:16Z
dc.date.issued2024
dc.identifier.issn0378-3839
dc.identifier.urihttp://hdl.handle.net/10498/32134
dc.description.abstractThis study develops a calibration method for the porous media to properly model the interaction between waves and coastal structures using VARANS models. The proposed method estimates the porosity, np, and the optimum values of the Forchheimer coefficients, α and β, that best represent the wave-structure interaction for a complete set of laboratory tests. Physical tests were conducted in a 2D wave flume for a homogeneous mound breakwater under regular wave conditions. Numerical tests were carried out using the IH-2VOF model to simulate the corresponding physical tests and incident wave conditions (HI, T). The numerical tests covered a wide range of Forchheimer coefficients found in the literature, α and β, and the porosity, np, with a total of 555 numerical tests. The results of 375 numerical tests using IH-2VOF were used to train a Neural Network (NN) model with five input variables (HI, T, np, α and β) and one output variable (KR2). The NN model explained more than 90% (R2 > 0.90 and RMSE <5%) of the variance of the squared coefficient of reflection, KR2. This NN model was used to estimate the KR2 in a wide range of np, α and β, and the error (εa) between the physical measurements with regular waves and the NN estimations of KR2 was calculated. The results of εa as function of np, α and β showed that for a given porosity, np, it was difficult to obtain a pair of α and β values that gave a common low error if few physical tests are used for calibration. Then to calibrate properly a VARANS model it seems necessary to check the results obtained for each combination of α and β with many laboratory {HI, T} tests. The minimum root-mean-square error of KR2 (εrms) was calculated to find the optimum values of porosity and Forchheimer coefficients: np = 0.44, α = 200 and β = 2.825 for the tested structure. Blind tests were conducted with the remaining 180 numerical tests using IH-2VOF to validate the proposed method for VARANS models. In this study, eight or more physical tests were required to find adequate values of np, α and β for VARANS models related to the best performance of wave-porous structure interaction.es_ES
dc.formatapplication/pdfes_ES
dc.language.isoenges_ES
dc.publisherElsevier B.V.es_ES
dc.rightsAtribución 4.0 Internacional*
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/*
dc.sourceCoastal Engineering - 2024, Vol. 188, artículo número 104443es_ES
dc.subjectIH-2VOFes_ES
dc.subjectMound breakwaterses_ES
dc.subjectNeural Networkes_ES
dc.subjectNumerical modellinges_ES
dc.subjectPorous mediaes_ES
dc.subjectVARANS equationses_ES
dc.titleNeural Network calibration method for VARANS models to simulate wave-coastal structures interactiones_ES
dc.typejournal articlees_ES
dc.rights.accessRightsopen accesses_ES
dc.identifier.doi10.1016/J.COASTALENG.2023.104443
dc.relation.projectIDinfo:eu-repo/grantAgreement/AEI//PID2021-128035OA-I00es_ES
dc.relation.projectIDinfo:eu-repo/grantAgreement/AEI//PID2021-126475OB-I00es_ES
dc.relation.projectIDinfo:eu-repo/grantAgreement/AEI//FJC2020-044778-Ies_ES
dc.type.hasVersionVoRes_ES


Files in this item

This item appears in the following Collection(s)

Show simple item record

Atribución 4.0 Internacional
This work is under a Creative Commons License Atribución 4.0 Internacional