Show simple item record

dc.contributor.authorBergaliyeva, Saltanat
dc.contributor.authorSales Lérida, David 
dc.contributor.authorDelgado González, Francisco Javier 
dc.contributor.authorBolegenova, Saltanat
dc.contributor.authorMolina Rubio, Sergio Ignacio 
dc.contributor.otherCiencia de los Materiales e Ingeniería Metalúrgica y Química Inorgánicaes_ES
dc.date.accessioned2024-05-30T12:53:19Z
dc.date.available2024-05-30T12:53:19Z
dc.date.issued2023
dc.identifier.issn2073-4360
dc.identifier.urihttp://hdl.handle.net/10498/32449
dc.description.abstractThis paper studies the thermal, morphological, and mechanical properties of 3D-printed polylactic acid (PLA) blends of virgin and recycled material in the following proportions: 100/0, 25/75, 50/50, and 75/25, respectively. Real waste, used as recycled content, was shredded and sorted by size without a washing step. Regular dog-bone specimens were 3D printed from filaments, manufactured in a single screw extruder. Thermogravimetric analysis indicated that adding PLA debris to raw material did not significantly impact the thermal stability of the 3D-printed samples and showed that virgin and recycled PLA degraded at almost the same temperature. Differential scanning calorimetry revealed a significant reduction in crystallinity with increasing recycled content. Scanning electron microscopy showed a more homogenous structure for specimens from 100% pure PLA, as well as a more heterogeneous one for PLA blends. The tensile strength of the PLA blends increased by adding more recycled material, from 44.20 2.18 MPa for primary PLA to 52.61 2.28 MPa for the blend with the highest secondary PLA content. However, this study suggests that the mechanical properties of the reprocessed parts and their basic association are unique compared with those made up of virgin material.es_ES
dc.formatapplication/pdfes_ES
dc.language.isoenges_ES
dc.publisherMDPIes_ES
dc.rightsAttribution 4.0 Internacional*
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/*
dc.sourcePolymers - 2023, Vol. 15 n. 9 pp. 1-13es_ES
dc.subjectpolylactic acides_ES
dc.subjectrecycling; wastees_ES
dc.subjectadditive manufacturinges_ES
dc.subjectfused filament fabricationes_ES
dc.subjectthermogravimetryes_ES
dc.subjectcalorimetryes_ES
dc.subjectscanning electron microscopyes_ES
dc.subjecttensile strengthes_ES
dc.titleManufacture and Characterization of Polylactic Acid Filaments Recycled from Real Waste for 3D Printinges_ES
dc.typejournal articlees_ES
dc.rights.accessRightsopen accesses_ES
dc.identifier.doi10.3390/POLYM15092165
dc.relation.projectIDTEP-946es_ES
dc.type.hasVersionVoRes_ES


Files in this item

This item appears in the following Collection(s)

Show simple item record

Attribution 4.0 Internacional
This work is under a Creative Commons License Attribution 4.0 Internacional