Mostrar el registro sencillo del ítem

dc.contributor.authorSierra Padilla, Alfonso 
dc.contributor.authorGarcía Guzmán, Juan José 
dc.contributor.authorBlanco Díaz, Lorena
dc.contributor.authorBellido Milla, Dolores 
dc.contributor.authorPalacios Santander, José María 
dc.contributor.authorCubillana Aguilera, Laura 
dc.contributor.otherQuímica Analíticaes_ES
dc.date.accessioned2024-06-25T08:16:34Z
dc.date.available2024-06-25T08:16:34Z
dc.date.issued2023-09-26
dc.identifier.issn2673-4591
dc.identifier.urihttp://hdl.handle.net/10498/32741
dc.description.abstractIn this work, an amperometric biosensor for lactate determination based on a sonogel–carbon transducer has been developed and evaluated using the lactate oxidase enzyme coated with a multipolymer layer as a bioreceptor. The biosensor obtained had adequate sensitivity (4.16 × 10−8 A mM−1) and a wide linear working range (0.2–20 mM) that allowed for the determination of lactate at high concentrations without showing enzyme saturation phenomena. The selectivity of the biosensor was also verified using interferents commonly observed in physiological samples. Moreover, a microfluidic cell was designed and fabricated to allow the determination of lactate with the proposed biosensor in a continuous regime. In the end, the viability of the biosensor was tested with the proposed flow system using synthetic samples, obtaining excellent results.es_ES
dc.formatapplication/pdfes_ES
dc.language.isoenges_ES
dc.publisherMDPIes_ES
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 Internacional*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/*
dc.sourceEngineering Proceedings, Vol. 48, Núm. 1, 2023es_ES
dc.subjectlactate biosensores_ES
dc.subjectsonogel–carbones_ES
dc.subjectgold sono-nanoparticleses_ES
dc.subjectmicrofluidic celles_ES
dc.subject3D printinges_ES
dc.titleInnovative Multipolymer-Based Electrochemical Biosensor Built on a Sonogel–Carbon Electrode Aiming for Continuous and Real-Time Lactate Determination in Physiological Samples: A New Scenario to Exploit Additive Printing †es_ES
dc.typejournal articlees_ES
dc.rights.accessRightsopen accesses_ES
dc.identifier.doihttps://doi.org/10.3390/CSAC2023-14902
dc.relation.projectIDinfo:eu-repo/grantAgreement/AEI//PID2021-122578NB-I00es_ES
dc.type.hasVersionVoRes_ES


Ficheros en el ítem

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem

Attribution-NonCommercial-NoDerivatives 4.0 Internacional
Esta obra está bajo una Licencia Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 Internacional