Show simple item record

dc.contributor.authorZaharia, A.
dc.contributor.authorNedeff, V.
dc.contributor.authorLópez Ramírez, Juan Antonio 
dc.contributor.authorMoșneguțu, E.
dc.contributor.authorBârsan, N.
dc.contributor.authorLehadus-Panaite, M.
dc.contributor.authorKrzysztof, J.
dc.contributor.authorTomozei, C.
dc.contributor.otherTecnologías del Medio Ambientees_ES
dc.date.accessioned2024-06-26T08:18:50Z
dc.date.available2024-06-26T08:18:50Z
dc.date.issued2024
dc.identifier.issn2073-4441
dc.identifier.urihttp://hdl.handle.net/10498/32764
dc.description.abstractIn recent years, more and more emphasis has been placed on the use of home filtration systems as a coarse pre-filtration step. The PP (polypropylene) filter cartridge is one of the most common of these systems, with the role of retaining solid suspensions from drinking water. However, few studies have focused on the fouling analysis of PP cartridges using EDS (Energy-Dispersive X-ray Spectroscopy) analysis methods. Through this study, a clear and in-depth view of the structures and morphology of PP filter cartridges as well as their impurity retention capacities and their impact is provided with the help of an SEM (Scanning Electron Microscope) analyzer. To achieve these goals, it was necessary to establish a specialized preparation methodology for this type of material in order to analyze it using the SEM and, at the same time, determine the optimal setting of the SEM parameters (improved resolution, reduced acceleration voltage, reduced data acquisition time, etc.) depending on the analysis performed for the visualization and detailed characterization of surfaces. Based on the SEM-EDS analysis and characterization, an uneven distribution of impurities on the surface of the PP fibers was identified. The number of impurities varied according to the depth of the cartridge due to the sieving effect that occurred owing to the varied sizes and shapes of the impurities, but also the structural differences and pore sizes of the filter material. So, the most common chemical elements identified were Al, Si, Na, Cl, Ca, Fe, and S, having a predominantly higher intensity from the inside to the outside of the PP filter cartridge due to pressure forces and the uneven flow of filtered water.es_ES
dc.formatapplication/pdfes_ES
dc.language.isoenges_ES
dc.publisherMultidisciplinary Digital Publishing Institute (MDPI)es_ES
dc.rightsAtribución 4.0 Internacional*
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/*
dc.sourceWater (Switzerland) - 2024, Vol.16, n.1, pp. 1-22es_ES
dc.subjectFilter cartridgees_ES
dc.subjectFoulantses_ES
dc.subjectPolypropylenees_ES
dc.subjectScanning electron microscopees_ES
dc.titleScanning Electron Microscope Analysis of Polypropylene Filter Cartridges Used in Drinking Water Purification Systemses_ES
dc.typejournal articlees_ES
dc.rights.accessRightsopen accesses_ES
dc.description.physDesc22 páginases_ES
dc.identifier.doi10.3390/w16010165
dc.type.hasVersionVoRes_ES


Files in this item

This item appears in the following Collection(s)

Show simple item record

Atribución 4.0 Internacional
This work is under a Creative Commons License Atribución 4.0 Internacional