Show simple item record

dc.contributor.authorValendolf Nunes, Jackeline 
dc.contributor.authorPiñero Charlo, José Carlos 
dc.contributor.authorAlba Muñoz, Gonzalo 
dc.contributor.authorLloret Vieira, Fernando Manuel 
dc.contributor.authorFernández de los Reyes, Daniel 
dc.contributor.authorAraújo Gay, Daniel 
dc.contributor.otherCiencia de los Materiales e Ingeniería Metalúrgica y Química Inorgánicaes_ES
dc.date.accessioned2024-10-02T06:59:07Z
dc.date.available2024-10-02T06:59:07Z
dc.date.issued2024-05-31
dc.identifier.issn0169-4332
dc.identifier.urihttp://hdl.handle.net/10498/33491
dc.description.abstractThe fabrication of ohmic contacts is a fundamental technological step toward the development and manufacture of reliable electronic devices. However, in the case of diamond-based devices, there is a lack of knowledge related to the formation of these types of contacts. While the role of interface carbide formation on refractory–metal/diamond contacts has been reported as a key mechanism for the thermal stabilization and optimization of ohmic behaviour; there is still a lack of knowledge, at the diamond/tungsten (W) interface, related to the structural and chemical characteristics versus electrical performance. To fulfil this lack, W onto boron-doped diamond contacts were fabricated on a p+diamond layer by Electron-Beam Induced Deposition and followed by an annealing process. Then, W-diamond contacts were chemically, electrically, and structurally characterized at room temperature before and after thermal treatment. Once annealed, the Transfer Length Method (TLM) analysis revealed ohmic behaviour with specific contact resistance of 2.74 ×10 4 Ω⋅cm2. Electron Energy Loss Spectroscopy in Scanning Transmission Electron Microscopy (STEM-EELS) revealed tungsten carbide (WC) formation at the interface after annealing. So, a relation between WC formation and ohmic contact characteristics is demonstrated.es_ES
dc.formatapplication/pdfes_ES
dc.language.isoenges_ES
dc.publisherElsevieres_ES
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 Internacional*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/*
dc.sourceApplied Surface Science, Vol. 667, 2024es_ES
dc.subjectDiamondes_ES
dc.subjectEBIDes_ES
dc.subjectEELSes_ES
dc.subjectOhmic contactes_ES
dc.subjectTungstenes_ES
dc.titleMicroscopic evidence of carbide formation at the interface of tungsten-based ohmic contacts on diamondes_ES
dc.typejournal articlees_ES
dc.rights.accessRightsopen accesses_ES
dc.identifier.doi10.1016/j.apsusc.2024.160429
dc.relation.projectIDinfo:eu-repo/grantAgreement/Junta de Andalucía//PI002012es_ES
dc.relation.projectIDinfo:eu-repo/grantAgreement/AEI/Plan Estatal de Investigación Científica y Técnica y de Innovación 2021-2023/PDC2023-145907-I00/ES/CHIP OPTOACTIVADO DE DIAMANTE PARA CONVERTIDORES DE ENERGIA AEROESPACIALES/es_ES
dc.type.hasVersionVoRes_ES


Files in this item

This item appears in the following Collection(s)

Show simple item record

Attribution-NonCommercial-NoDerivatives 4.0 Internacional
This work is under a Creative Commons License Attribution-NonCommercial-NoDerivatives 4.0 Internacional