Mostrar el registro sencillo del ítem

dc.contributor.authorExpósito Carrillo, Jose Antonio
dc.contributor.authorGomis Payá, I.
dc.contributor.authorSalmerón Lissén, José Manuel
dc.contributor.authorSánchez de la Flor, Francisco José 
dc.contributor.authorRuiz Pardo, Álvaro 
dc.contributor.otherIngeniería Mecánica y Diseño Industriales_ES
dc.contributor.otherMáquinas y Motores Térmicoses_ES
dc.date.accessioned2024-10-09T08:54:59Z
dc.date.available2024-10-09T08:54:59Z
dc.date.issued2024
dc.identifier.issn1359-4311
dc.identifier.urihttp://hdl.handle.net/10498/33555
dc.description.abstractDriven by global climate objectives, the pursuit for eco-friendly refrigeration solutions has catalysed impressive advancements in the sector. Ammonia, a historically utilized refrigerant, is now widely adopted in light industrial applications, largely due to the growth of Ultra-Low Charge package chillers. Opportunities, however, persist for refining system components to further diminish refrigerant charge, fostering safer and more efficient solutions. This paper focuses on optimizing the oil separator geometry of an experimentally tested Ultra-Low Charge ammonia chiller. The principal aim and novelty is to lower the specific refrigerant charge while enhancing the separation efficiency and the pressure drop performance. Assessing the separation efficiency involves an analytical model grounded in the “orbit-equilibrium” concept, while the pressure drop is evaluated with consideration of liquid particles presence. Utilizing the validated model, a Multi-Objective Optimization process driven by the eaMuPlusLambda algorithm produces geometries able to reduce the cut-size diameter by 1.4 % up to 15.4 %, pressure drop by 66.7 % up to 89.1 %, and internal volume by 51.3 % up to 68.9 %, compared to the baseline setup. This accomplishment stems from meaningful parameter adjustments, encompassing a 12.1 – 30.0 % decrease in the main diameter, 35.8 % reduction in the main height, 25.4 – 41.2 % contraction in the outlet diameter, 10.9 – 47.1 % augmentation in the inlet diameter, and the vortex finder elimination. Consequently, this translates to a 5% to 14% decrease in the chiller’s specific charge. This study intends an initial step in optimizing oil separators for Ultra-Low Charge ammonia chillers, presenting prospects for specific charge reduction and inciting further exploration through experimental testing or Computational Fluid Dynamics.es_ES
dc.description.sponsorshipMinisterio de Ciencia e Innovación (España) Centro para el Desarrollo Tecnológico Industrial (España) Centro para el Desarrollo Tecnológico Industrial (España)es_ES
dc.formatapplication/pdfes_ES
dc.language.isoenges_ES
dc.publisherElsevier Ltdes_ES
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 Internacional*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/*
dc.sourceApplied Thermal Engineering - 2024, Vol.251 pp. 1-14es_ES
dc.subjectMulti-Objective Optimisationes_ES
dc.subjectOil separatores_ES
dc.subjectR717es_ES
dc.subjectUltra-low-chargees_ES
dc.titleMulti-Objective optimisation of oil demisters geometry for Ultra-Low charge ammonia chillerses_ES
dc.typejournal articlees_ES
dc.rights.accessRightsopen accesses_ES
dc.description.physDesc14 páginases_ES
dc.identifier.doi10.1016/J.APPLTHERMALENG.2024.123553
dc.relation.projectIDinfo:eu-repo/grantAgreement/AEI/Plan Estatal de Investigación Científica y Técnica y de Innovación 2017-2020/PID2020-115994RB-I00/ES/MEJORA DEL RENDIMIENTO MEDIO ESTACIONAL DE EQUIPOS DE PRODUCCION DE FRIO MEDIANTE EYECTORES CONTROLADOS. DESARROLLO E INVESTIGACION EXPERIMENTAL DE EYECTORES MODULARES./ es_ES
dc.type.hasVersionVoRes_ES


Ficheros en el ítem

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem

Attribution-NonCommercial-NoDerivatives 4.0 Internacional
Esta obra está bajo una Licencia Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 Internacional