Show simple item record

dc.contributor.authorSánchez Amaya, José María 
dc.contributor.authorPasang, Timotius
dc.contributor.authorAmaya Vázquez, Margarita Raquel
dc.contributor.authorLópez Castro, Juan De Dios 
dc.contributor.authorChuriaque Bermejo, Cristina 
dc.contributor.authorTao, Yuan
dc.contributor.authorBotana Pedemonte, Francisco Javier 
dc.contributor.otherCiencia de los Materiales e Ingeniería Metalúrgica y Química Inorgánicaes_ES
dc.contributor.otherIngeniería Mecánica y Diseño Industriales_ES
dc.date.accessioned2024-11-29T07:38:04Z
dc.date.available2024-11-29T07:38:04Z
dc.date.issued2017
dc.identifier.issn2075-4701
dc.identifier.urihttp://hdl.handle.net/10498/33949
dc.description.abstractTi-5Al-5V-5Mo-3Cr (Ti5553) is a metastable titanium alloy with a high potential use in the aeronautic industry due to its high strength, excellent hardenability, fracture toughness and high fatigue resistance. However, recent research shows this alloy has a limited weldability. Different welding technologies have been applied in the literature to weld this alloy, such as electron beam welding (EBW), gas tungsten arc welding (GTAW) or laser beam welding (LBW) under keyhole regime. Thus, in tensile tests, joints normally break at the weld zones, the strength of the welds being always lower than that of the base metal. In the present work, a novel approach, based on the application of LBW under conduction regime (with a High-Power Diode Laser, HPDL), has been employed for the first time to weld this alloy. Microstructure, microhardness and strength of obtained welds were analyzed and reported in this paper. LBW under conduction regime (LBW-CR) leads to welds with slightly higher values of Ultimate Tensile Strength (UTS) than those previously obtained with other joining processes, probably due to the higher hardness of the fusion zone and to lower porosity of the weld.es_ES
dc.formatapplication/pdfes_ES
dc.language.isoenges_ES
dc.publisherMDPIes_ES
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 Internacional*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/*
dc.sourceMetals - 2017, Vol. 7 n. 7 pp. 1-12es_ES
dc.subjectlaser beam weldinges_ES
dc.subjectconduction regimees_ES
dc.subjectTi-5Al-5V-5Mo-3Cres_ES
dc.titleMicrostructure and mechanical properties of Ti5553 butt welds performed by LBW under conduction regimees_ES
dc.typejournal articlees_ES
dc.rights.accessRightsopen accesses_ES
dc.identifier.doi10.3390/MET7070269
dc.type.hasVersionVoRes_ES


Files in this item

This item appears in the following Collection(s)

Show simple item record

Attribution-NonCommercial-NoDerivatives 4.0 Internacional
This work is under a Creative Commons License Attribution-NonCommercial-NoDerivatives 4.0 Internacional