Show simple item record

dc.contributor.authorDella Gatta, Roberta
dc.contributor.authorDel Sol, Irene
dc.contributor.authorSol Illana, Irene del 
dc.contributor.authorCaraviello, Antonio
dc.contributor.authorAstarita, Antonello
dc.contributor.otherIngeniería Mecánica y Diseño Industriales_ES
dc.date.accessioned2025-01-24T11:43:24Z
dc.date.available2025-01-24T11:43:24Z
dc.date.issued2021-04-12
dc.identifier.issn1042-6914
dc.identifier.urihttp://hdl.handle.net/10498/34733
dc.description.abstractA customized Al-Cu-Mg-Si alloy is successfully processed by selective laser melting. AlSi10Mg powder, used as a master alloy, has been mixed with pure Cu powder through a fluidized bed and the obtained powder mix was used as feedstock material for the printing process. To investigate the feasibility of the process and to discuss the effect of the process parameters, a two-step experimental campaign has been carried out: in the first batch of experiments the energy density has been varied to frame the processing window while in the second batch the energy density has been kept constant and the main process parameters have been varied to highlight their influence on the process. Density, porosity, and microhardness have been chosen as output to evaluate the success of the process. The microstructure and composition phase were studied through scanning electron microscopy and X-ray elemental mapping, respectively. A maximum relative density of 97% has been obtained while a predominant role of the laser beam power has been observed.es_ES
dc.formatapplication/pdfes_ES
dc.language.isoenges_ES
dc.publisherTaylor & Francises_ES
dc.sourceMaterials and Manufacturing Processes, Vol. 36, Núm. 12, 2021, pp. 1438-1449es_ES
dc.subjectSelective; laseres_ES
dc.subjectmeltinges_ES
dc.subjectslmes_ES
dc.subjectalsi10mges_ES
dc.subjectcues_ES
dc.subjectmixturees_ES
dc.subjectprocesses_ES
dc.subjectparameterses_ES
dc.subjectpoweres_ES
dc.subjectenergyes_ES
dc.subjectdensityes_ES
dc.titleSelective laser melting of an Al-Si-Mg-Cu alloy: feasibility and processing aspectses_ES
dc.typejournal articlees_ES
dc.rights.accessRightsclosed accesses_ES
dc.identifier.doi10.1080/10426914.2021.1906900
dc.relation.projectIDinfo:eu-repo/grantAgreement/MINECO//DPI2015-71448-R/ES/ANALISIS Y EVALUACION DEL RENDIMIENTO DE TECNOLOGIAS EN EL MECANIZADO DE CONTORNOS DE FIBRA DE CARBONO/ es_ES
dc.type.hasVersionVoRes_ES


Files in this item

This item appears in the following Collection(s)

Show simple item record