Show simple item record

dc.contributor.authorTerrones Saeta, Juan María 
dc.contributor.authorSuárez Macías, Jorge
dc.contributor.authorIglesias Godino, Francisco Javier
dc.contributor.authorCorpas Iglesias, Francisco Antonio
dc.contributor.otherIngeniería Industrial e Ingeniería Civiles_ES
dc.date.accessioned2025-01-30T10:02:34Z
dc.date.available2025-01-30T10:02:34Z
dc.date.issued2020
dc.identifier.issn2075-4701
dc.identifier.urihttp://hdl.handle.net/10498/35131
dc.description.abstractThe construction sector is one of the most demanding of raw materials that exist at present. In turn, the greenhouse gas emissions that it produces are important. Therefore, at present there are several lines of research in which industrial by-products are incorporated for the manufacture of bituminous mixtures and the reduction of CO2 emissions, framed inside the circular economy. On the base of the aforementioned, in this research, bituminous mixtures of the Stone Mastic Asphalt type were developed with electric arc furnace slag, ladle furnace slag and discarded cellulose fibers from the papermaking industry. To this end, the waste is first characterized physically and chemically, and its properties evaluated for use in bituminous mixtures. Later, different groups of samples are conformed with conventional materials and with the waste in order to be able to compare the physical and mechanical properties of the obtained bituminous mixtures. The physical tests carried out were bulk density, maximum density and void index, as well as the Marshall test for the evaluation of the strength and plastic deformations of all the bituminous mixtures manufactured. The study and evaluation of the results showed that the incorporation of slag makes it possible to absorb a greater percentage of bitumen and obtain better mechanical properties, while maintaining a similar deformation and void content. Therefore, it is feasible to use the mentioned slags to create sustainable, resistant and suitable pavements for important traffic.es_ES
dc.formatapplication/pdfes_ES
dc.language.isoenges_ES
dc.publisherMDPIes_ES
dc.sourceMetals - 2020, Vol. 10 n.11 p. 1548es_ES
dc.subjectpavementes_ES
dc.subjectbituminous mixtureses_ES
dc.subjectelectric arc furnace slages_ES
dc.subjectladle furnace slages_ES
dc.subjectcellulose fiberses_ES
dc.subjectstone mastic asphaltes_ES
dc.subjectsustainabilityes_ES
dc.subjectsteeles_ES
dc.subjectcircular economyes_ES
dc.titleEvaluation of the use of electric arc furnace slag and ladle furnace slag in stone mastic asphalt mixes with discarded cellulose fibers from the papermaking industryes_ES
dc.typejournal articlees_ES
dc.rights.accessRightsopen accesses_ES
dc.identifier.doi10.3390/met10111548
dc.type.hasVersionVoRes_ES


Files in this item

This item appears in the following Collection(s)

Show simple item record