Show simple item record

dc.contributor.authorTerrones Saeta, Juan María 
dc.contributor.authorSuárez Macías, Jorge
dc.contributor.authorCorpas Iglesias, Francisco Antonio
dc.contributor.authorKorobiichuk, Valentyn
dc.contributor.authorShamrai, Volodymyr
dc.contributor.otherIngeniería Industrial e Ingeniería Civiles_ES
dc.date.accessioned2025-01-30T12:33:43Z
dc.date.available2025-01-30T12:33:43Z
dc.date.issued2020
dc.identifier.issn2075-163X
dc.identifier.urihttp://hdl.handle.net/10498/35159
dc.description.abstractThe manufacture of bricks for building purposes consumes large quantities of virgin materials, such as clay. On the other hand, the ornamental stone processing industry produces a huge amount of stone cutting sludge in its process. Therefore, this study presents the development of ceramic materials for the manufacture of bricks with stone cutting sludges, more specifically from granite. For this purpose, the physical properties of the stone cutting sludge and the chemical composition were mainly analyzed. Subsequently, different groups of ceramic samples were conformed and sintered with various combinations of clay and of stone cutting sludges. The conformed samples were evaluated with different physical tests and with the compressive strength test. The addition of stone cutting sludges to the ceramics reflected the creation of a material with lower density and higher porosity. The compressive strength of the different groups reflected a maximum allowable percentage of stone cutting sludges incorporation of 70%. Therefore, ceramic materials were developed with stone cutting sludges, developing a sustainable, lighter material with acceptable mechanical and physical characteristics. Avoiding the deposition of a polluting waste in a landfill and at the same time avoiding the extraction of new virgin materials.es_ES
dc.formatapplication/pdfes_ES
dc.language.isoenges_ES
dc.publisherMDPIes_ES
dc.sourceMinerals - 2020, Vol. 10 n. 7 p. 621es_ES
dc.subjectstone cutting sludgees_ES
dc.subjectmining wastees_ES
dc.subjectceramices_ES
dc.subjectbrickes_ES
dc.subjectclayes_ES
dc.subjectgranitees_ES
dc.subjectsustainabilityes_ES
dc.subjectcompressive strengthes_ES
dc.subjectphysical testses_ES
dc.titleDevelopment of ceramic materials for the manufacture of bricks with stone cutting sludge from granitees_ES
dc.typejournal articlees_ES
dc.rights.accessRightsopen accesses_ES
dc.identifier.doi10.3390/min10070621
dc.type.hasVersionVoRes_ES


Files in this item

This item appears in the following Collection(s)

Show simple item record