Show simple item record

dc.contributor.authorSanz de León, Alberto Darío
dc.contributor.authorPulido, José Antonio
dc.contributor.authorFernández Delgado, Natalia
dc.contributor.authorDelgado González, Francisco Javier 
dc.contributor.authorMolina Rubio, Sergio Ignacio 
dc.contributor.otherCiencia de los Materiales e Ingeniería Metalúrgica y Química Inorgánicaes_ES
dc.date.accessioned2025-02-24T12:06:01Z
dc.date.available2025-02-24T12:06:01Z
dc.date.issued2024
dc.identifier.issn1944-8252
dc.identifier.issn1944-8244
dc.identifier.urihttp://hdl.handle.net/10498/35588
dc.description.abstractIn this work, we present a series of nanocomposites for Fused filament fabrication (FFF) based on polycaprolactone (PCL) and chitin nanocrystals (ChNCs). The ChNCs were synthesized by acid hydrolysis using HCl or lactic acid (LA). The approach using LA, an organic acid, makes the ChNCs synthesis more sustainable and modifies their surface with lactate groups, increasing their compatibility with the PCL matrix. The ChNCs characterization by X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, and transmission electron microscopy revealed that both ChNCs presented similar morphologies and crystallinity, while differential scanning calorimetry and thermogravimetric analysis proved that they can bear temperatures up to 210 °C without degrading, which allows their processing in the manufacturing of PCL composites by twin-screw extrusion. Therefore, PCL composites in the form of filaments containing 0.5-1.0 wt % ChNCs were produced and used as feedstock in FFF, and standard tensile and flexural specimens were printed at different temperatures, up to 170 °C, to assess the influence of the ChNCs in the mechanical properties of the material. The tensile testing results showed that the presence of ChNCs enhances the strength and ductility of the PCL matrix, increasing the elongation at break around 20-50%. Moreover, the vertically printed flexural specimens showed a very different bending behavior, such that the pure PCL specimens presented a brittle fracture at 7% strain, while the ChNCs composites were able to bend over themselves. Hence, this work proves that the presence of ChNCs aims to improve the interlayer adhesion of the objects manufactured by FFF due to their good adhesive properties, which is currently a concern for the scientific community and the industrial sector.es_ES
dc.formatapplication/pdfes_ES
dc.language.isoenges_ES
dc.publisherAmerican Chemical Societyes_ES
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 Internacional*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/*
dc.sourceACS Applied Materials and Interfaces - 2027, Vol. 16 n. 27 pp. 35554-35565es_ES
dc.subjectadditive manufacturinges_ES
dc.subjectfused filament fabricationes_ES
dc.subjectchitin nanocrystalses_ES
dc.subjectnanocompositeses_ES
dc.subjectmechanical propertieses_ES
dc.titleChitin Nanocomposites for Fused Filament Fabrication: Flexible Materials with Enhanced Interlayer Adhesiones_ES
dc.typejournal articlees_ES
dc.rights.accessRightsopen accesses_ES
dc.identifier.doi10.1021/ACSAMI.4C06358
dc.type.hasVersionVoRes_ES


Files in this item

This item appears in the following Collection(s)

Show simple item record

Attribution-NonCommercial-NoDerivatives 4.0 Internacional
This work is under a Creative Commons License Attribution-NonCommercial-NoDerivatives 4.0 Internacional