Mostrar el registro sencillo del ítem

dc.contributor.authorMaturi, Mirko 
dc.contributor.authorMigliorini, Lorenzo
dc.contributor.authorVilla, Sara Moon
dc.contributor.authorSantaniello, Tommaso
dc.contributor.authorFernández Delgado, Natalia 
dc.contributor.authorMolina Rubio, Sergio Ignacio 
dc.contributor.authorMilani, Paolo
dc.contributor.authorSanz de León, Alberto 
dc.contributor.authorComes Franchini, Mauro
dc.contributor.otherCiencia de los Materiales e Ingeniería Metalúrgica y Química Inorgánicaes_ES
dc.date.accessioned2025-02-26T10:20:32Z
dc.date.available2025-02-26T10:20:32Z
dc.date.issued2025
dc.identifier.issn1616-3028
dc.identifier.issn1616-301X
dc.identifier.urihttp://hdl.handle.net/10498/35622
dc.description.abstractThis work describes the development and characterization of tetragonal barium titanate nanoparticles (BTO NPs) and their surface functionalization with dopamine dodecylamine (DDA), a lipophilic organic ligand. The so-obtained lipophilic NPs (BTO-DDA) are then formulated at low loadings (< 5 wt.%) into liquid photocurable resins for vat photopolymerization (VP) and 3D printed into solid objects. The printed composites are mechanically characterized in order to assess the effect of the nanomaterial on the mechanical properties of the 3D printed polymer, revealing no significant variations in the mechanical properties (tensile or flexural) of the nanocomposites compared to the original polymer matrix. In light of these results, the printed nanocomposites are studied in terms of their capacity to generate a separation of charge by the piezoelectric effect, typical of the BTO crystal structure. This study reveals that BTO-loaded nanocomposites display outstanding piezoelectric coefficients as high as 50 pC/N when BTO-DDA is formulated at 3.0 wt.%, only slightly less than one-third of the piezoelectric coefficient previously reported for bulk BTO, while preserving the mechanical properties of the polymer matrix.es_ES
dc.formatapplication/pdfes_ES
dc.language.isoenges_ES
dc.publisherJohn Wiley and Sons Inces_ES
dc.rightsAtribución 4.0 Internacional*
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/*
dc.sourceAdvanced Functional Materials - 2025, Vol. 25 n. 1, artículo n. 2407077es_ES
dc.subjectadditive manufacturinges_ES
dc.subjectbarium titanatees_ES
dc.subjectnanocompositeses_ES
dc.subjectpiezoelectric materialses_ES
dc.subjectsurface modificationes_ES
dc.subjectvat photopolymerizationes_ES
dc.title3D-Printing of Highly Piezoelectric Barium Titanate Polymer Nanocomposites with Surface-Modified Nanoparticles at Low Loadingses_ES
dc.typejournal articlees_ES
dc.rights.accessRightsopen accesses_ES
dc.identifier.doi10.1002/adfm.202407077
dc.relation.projectIDinfo:eu-repo/grantAgreement/Junta de Andalucía//TEP-946es_ES
dc.type.hasVersionVoRes_ES


Ficheros en el ítem

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem

Atribución 4.0 Internacional
Esta obra está bajo una Licencia Creative Commons Atribución 4.0 Internacional