Mostrar el registro sencillo del ítem

dc.contributor.authorMcKinlay, Michael
dc.contributor.authorFleming, Lewis
dc.contributor.authorPelayo García, Manuel
dc.contributor.authorNieto Sierra, Lucía 
dc.contributor.authorVillar Castro, María del Pilar 
dc.contributor.authorAraújo Gay, Daniel 
dc.contributor.authorGarcía, Basilio Javier
dc.contributor.authorGibson, Des
dc.contributor.authorGarcía Núñez, Carlos
dc.contributor.otherCiencia de los Materiales e Ingeniería Metalúrgica y Química Inorgánicaes_ES
dc.date.accessioned2025-04-10T11:49:21Z
dc.date.available2025-04-10T11:49:21Z
dc.date.issued2024
dc.identifier.issn2196-7350
dc.identifier.urihttp://hdl.handle.net/10498/36145
dc.description.abstractThis work presents a study of piezoelectric zinc oxide (ZnO) thin films deposited by a novel post-reactive sputtering method. The process utilizes a rotating drum with DC magnetron sputtering deposition onto substrates with subsequent DC plasma-assisted oxidation of the deposited metal to metal oxide. The paper analyzes the influence of plasmaassisted magnetron sputtering (PA-MS) deposition parameters (O2 plasma source power, O2 flow, and Ar flow) on the morphological, structural, optical, and piezoelectric properties of ZnO thin films. Design of experiments has been utilized to evaluate the role of these parameters on the growth rate (rg) and the properties of resulting films. Results indicate a predominant influence of the plasma power on the rg over other parameters. Among the eight tested samples, three of them show high crystal quality with high intensity (0001) diffraction peak, characteristic of the wurtzite crystalline structure of ZnO, and one of them exhibits piezoelectric coefficient values of ≈11pC N−1. That sample corresponding to a ZnO film deposited at the lowest rg of 0.075 nm s−1, confirmed the key role of the deposition parameters on the piezoelectric response of films, and demonstrated PA-MS as a promising technique to produce high-quality piezoelectric thin films.es_ES
dc.formatapplication/pdfes_ES
dc.language.isoenges_ES
dc.publisherJohn Wiley and Sons Inc.es_ES
dc.rightsAtribución 4.0 Internacional*
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/*
dc.sourceAdvanced Materials Interfaces - 2024, Vol. 11 n. 32, artículo n. 2400252es_ES
dc.subjectoptoelectronicses_ES
dc.subjectpiezoelectricses_ES
dc.subjectplasma physicses_ES
dc.subjectplasma-assisted magnetron sputtering, PVDes_ES
dc.subjectthin film depositiones_ES
dc.subjectzinc oxidees_ES
dc.titleOn the Piezoelectric Properties of Zinc Oxide Thin Films Synthesized by Plasma Assisted DC Sputter Depositiones_ES
dc.typejournal articlees_ES
dc.rights.accessRightsopen accesses_ES
dc.identifier.doi10.1002/admi.202400252
dc.relation.projectIDinfo:eu-repo/grantAgreement/AEI/Plan Estatal de Investigación Científica y Técnica y de Innovación 2021-2023/PDC2023-145907-I00/ES/CHIP OPTOACTIVADO DE DIAMANTE PARA CONVERTIDORES DE ENERGIA AEROESPACIALES/es_ES
dc.type.hasVersionVoRes_ES


Ficheros en el ítem

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem

Atribución 4.0 Internacional
Esta obra está bajo una Licencia Creative Commons Atribución 4.0 Internacional