Show simple item record

dc.contributor.authorSainz Calvo, Álvaro Jesús 
dc.contributor.authorSierra Padilla, Alfonso 
dc.contributor.authorBellido Milla, Dolores 
dc.contributor.authorCubillana Aguilera, Laura 
dc.contributor.authorGarcía Guzmán, Juan José 
dc.contributor.authorPalacios Santander, José María 
dc.contributor.otherQuímica Analíticaes_ES
dc.date.accessioned2025-05-23T11:42:44Z
dc.date.available2025-05-23T11:42:44Z
dc.date.issued2025
dc.identifier.issn2227-9040
dc.identifier.urihttp://hdl.handle.net/10498/36347
dc.description.abstractIn the present work, a novel and economical pH sensor has been improved through the application of the conducting polymers poly(3,4-ethylendioxythiphene) and poly(sodium 4-styrene sulphonate). Sinusoidal voltages were applied to electrodeposit the different polymers studied for different periods (10, 15, and 20 min) on the electrode surface. The presence of polyaniline and its reversible redox structure have been corroborated by cyclic voltammetry. The working range has been increased from 3–8 to 2–12, obtaining adequate sensibility and linearity. This new sensor presented satisfactory repeatability, reproducibility (RSD < 5%), AND reversibility (pH range 2–12), and excellent selectivity towards H+ in the presence of diverse interferents in agrifood samples. Finally, the sensor was used to measure the pH in several real samples, whose pH values ranged from 2.23 to 11.5, obtaining excellent results. In addition, the values found were very similar to those reported by the gold technique (pH meter), with an error of less than 10% for most of the samples analyzed. In addition, a preliminary survey about measurements in a continuous flow, using a 3D homemade microfluidic cell, was performed with promising results.es_ES
dc.formatapplication/pdfes_ES
dc.language.isoenges_ES
dc.publisherMultidisciplinary Digital Publishing Institute (MDPI)es_ES
dc.rightsAtribución 4.0 Internacional*
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/*
dc.sourceChemosensors, Vol. 13, Núm. 2, 2025es_ES
dc.subjectagrifood monitoringes_ES
dc.subjectcontinuous flowes_ES
dc.subjectPANIes_ES
dc.subjectPEDOT:PSSes_ES
dc.subjectpH sensores_ES
dc.subjectsinusoidal voltageses_ES
dc.subjectsonogel–carbones_ES
dc.titleFast, Economic, and Improved Nanostructured Polymeric pH Sensor for Agrifood Analysises_ES
dc.typejournal articlees_ES
dc.rights.accessRightsopen accesses_ES
dc.identifier.doi10.3390/chemosensors13020063
dc.relation.projectIDinfo:eu-repo/grantAgreement/AEI/Plan Estatal de Investigación Científica y Técnica y de Innovación 2021-2023/PID2021-122578NB-I00/ES/DESARROLLO Y VALIDACION DE UN DISPOSITIVO MULTIPARAMETRICO PARA EL ANALISIS EN CONTINUO DE MUESTRAS BIOMEDICAS/es_ES
dc.type.hasVersionVoRes_ES


Files in this item

This item appears in the following Collection(s)

Show simple item record

Atribución 4.0 Internacional
This work is under a Creative Commons License Atribución 4.0 Internacional