Show simple item record

dc.contributor.authorÁlvarez Alcón, Miguel 
dc.contributor.authorGómez Parra, Álvaro 
dc.contributor.authorSalguero Gómez, Jorge 
dc.contributor.authorBatista Ponce, Moisés 
dc.contributor.authorHuerta Gómez de Merodio, Milagros 
dc.contributor.authorMarcos Bárcena, Mariano
dc.contributor.otherIngeniería Mecánica y Diseño Industriales_ES
dc.date.accessioned2026-01-27T11:49:23Z
dc.date.available2026-01-27T11:49:23Z
dc.date.issued2010
dc.identifier.isbn9780878492770
dc.identifier.issn1022-6680
dc.identifier.urihttp://hdl.handle.net/10498/38476
dc.description.abstractTitanium based alloys, mainly UNS R56400 (Ti6Al4V), are increasingly being applied in the airship building industry due to its excellent physicochemical properties. Machining operations are usually required in the manufacturing processes of Ti based aerospace structural elements. However, high reactivity of Ti provokes a quick tool wear. So, in order to reach an economically acceptable production level, it is necessary to minimize the costs associated to tool wear. In this work, Scanning Electron Microscopy (SEM), Stereoscopic Optical Microscopy (SOM) and Energy Dispersive Spectroscopy (EDS) have been used for both analysing and identifying secondary adhesion mechanisms that are taking place when an aeronautical titanium alloy is machined. Special severe cutting conditions have been applied. Thus, titanium alloy have been dry machined with TiN coated WC-Co tools. Results obtained have shown that tool wear is controlled by a secondary adhesion mechanism, which presents two stages. A first stage is constituted by a TiOx multi-film formed onto the tool surfaces. A second step involves the mechanical adhesion of the alloy material to those surfaces. When this material is removed, tool particles are dragged off causing tool wear.es_ES
dc.description.sponsorshipThe development of this work has been supported by the Spanish Government, Project DPI2008-06771-C04-01and by the Andalusian Government.es_ES
dc.formatapplication/pdfes_ES
dc.language.isoenges_ES
dc.publisherTrans Tech Publications, Switzerlandes_ES
dc.sourceAdvanced Materials Research - 2010, Vol. 107 n.1 pp. 77-82es_ES
dc.subjectDry-Machininges_ES
dc.subjectSustainable Manufacturinges_ES
dc.subjectTool Weares_ES
dc.subjectTi6Al4Ves_ES
dc.subjectTi6Al4Ves_ES
dc.subjectSOM-SEM-EDSes_ES
dc.titleSOM-SEM-EDS identification of tool wear mechanisms in the dry-machining of aerospace titanium alloyses_ES
dc.typeconference outputes_ES
dc.rights.accessRightsclosed accesses_ES
dc.identifier.doihttps://doi.org/10.4028/www.scientific.net/AMR.107.77
dc.type.hasVersionVoRes_ES


Files in this item

This item appears in the following Collection(s)

Show simple item record