Show simple item record

dc.contributor.authorTrento Buzzatti, Diogo
dc.contributor.authorChludzinski, Mariane 
dc.contributor.authordos Santos, Rafael Eugenio 
dc.contributor.authorTrento Buzzatti, Jonas
dc.contributor.authorVieira Braga Lemos, Guilherme
dc.contributor.authorMattei, Fabiano
dc.contributor.authorReppold Marinho, Ricardo
dc.contributor.authorPiza Paes, Marcelo Torres
dc.contributor.authorReguly, Afonso
dc.contributor.otherCiencia de los Materiales e Ingeniería Metalúrgica y Química Inorgánicaes_ES
dc.date.accessioned2026-02-20T11:01:32Z
dc.date.available2026-02-20T11:01:32Z
dc.date.issued2019
dc.identifier.issn2625-2637
dc.identifier.urihttp://hdl.handle.net/10498/38758
dc.description.abstractIn the past few years, solid-state welding has been a great alternative in comparison to the conventional fusion welding technologies. Solid-state welds are usually processed in lower temperatures than the other common fusion joints, tending to avoid problems such as hydrogen embrittlement, brittle microstructures and porosity. Therefore, these advantages can be useful to industrial applications which do not allow fusion welding. Offshore mooring components, which are fabricated under restricted standard requirements to ensure the floating marine integrity, is one of these applications. Thus, defects in links of mooring chains cannot be repaired by traditional welding, resulting in high operational costs. In this context, this study aims to characterize the Friction Hydro-Pillar Processing (FHPP) application to a mooring chain steel IACS UR W22 grade R4. The main process parameter studied was an axial force ranging from 30 to 60 kN. The welded joints were evaluated by metallography (macro and microstructure) and microhardness mapping. Furthermore, the toughness properties were assessed by Charpy and Crack Tip Opening Displacement (CTOD) tests, and the fractures were afterwards observed by scanning electron microscopy (SEM). The results showed that an increase in the axial force enhances the Charpy and CTOD values.es_ES
dc.formatapplication/pdfes_ES
dc.language.isoenges_ES
dc.publisherElsevieres_ES
dc.sourceJournal of Materials Research and Technology, Vol. 8, Núm. 3, 2019, pp. 2625-2637es_ES
dc.subjectToughness propertieses_ES
dc.subjectMooring steel grade R4es_ES
dc.subjectFriction hydro-pillar processinges_ES
dc.subjectMicrostructurees_ES
dc.subjectMicrohardnesses_ES
dc.titleToughness properties of a friction hydro pillar processed offshore mooring chain steeles_ES
dc.typejournal articlees_ES
dc.rights.accessRightsopen accesses_ES
dc.identifier.doi10.1016/j.jmrt.2019.04.002
dc.type.hasVersionVoRes_ES


Files in this item

This item appears in the following Collection(s)

Show simple item record