Show simple item record

dc.contributor.authorMeinhardt, C.P.
dc.contributor.authorChludzinski, Mariane 
dc.contributor.authorRibeiro, R.F.
dc.contributor.authorRocha, C.L.F.
dc.contributor.authorSantos, A.C.S.
dc.contributor.authorStrohaecker, T.R.
dc.contributor.otherCiencia de los Materiales e Ingeniería Metalúrgica y Química Inorgánicaes_ES
dc.date.accessioned2026-02-23T15:07:02Z
dc.date.available2026-02-23T15:07:02Z
dc.date.issued2017
dc.identifier.issn0924-0136
dc.identifier.urihttp://hdl.handle.net/10498/38840
dc.description.abstractThis research investigates the effect of the process on the material mechanical and metallurgical properties. Fracture toughness tests were conducted employing C(T) specimens extracted from the welding mixing zone of the joint. A metallographic examination was performed to determine the morphology of the ferrite and austenite after the welding. Phase quantification indicated that the FHPP weld maintains the ferrite content below 70% in accordance with specifications required for equipment used in oil and gas production. The optical microscope analyses did not indicate a significant precipitation of intermetallic phases. X-ray diffraction indicates the presence of the sigma phase in the thermomechanically affected zone (TMAZ). The impact of the weld on the corrosion resistance of the UNS S31803 joint was evaluated by small-scale electrochemical polarizations. The toughness tests conducted on the welding mixing zone indicated a value (0.58 mm) similar to that observed in the original material (in the longitudinal direction). Those results indicates that the FHPP welding technique is adequate for maintaining the microstructural, corrosion and toughness properties according to the specifications required for equipment used in oil and gas exploration.es_ES
dc.formatapplication/pdfes_ES
dc.language.isoenges_ES
dc.publisherElsevieres_ES
dc.sourceJournal of Materials Processing Technology, Vol. 246, 2017, pp. 158-166es_ES
dc.titleEvaluation of friction hydro-pillar processing welding in duplex stainless steels (UNS S31803)es_ES
dc.typejournal articlees_ES
dc.rights.accessRightsopen accesses_ES
dc.identifier.doi10.1016/j.jmatprotec.2017.03.010
dc.type.hasVersionAMes_ES


Files in this item

This item appears in the following Collection(s)

Show simple item record