Show simple item record

dc.contributor.authorMayuet Ares, Pedro Francisco 
dc.contributor.authorRodríguez Parada, María Lucía 
dc.contributor.authorRosa Silva, Sergio de la 
dc.contributor.authorBatista Ponce, Moisés 
dc.contributor.otherIngeniería Mecánica y Diseño Industriales_ES
dc.date.accessioned2026-07-08T07:12:55Z
dc.date.available2026-07-08T07:12:55Z
dc.date.issued2026
dc.identifier.issn2075-4701
dc.identifier.urihttp://hdl.handle.net/10498/39973
dc.description.abstractAbrasive waterjet machining (AWJM) is widely used for cutting aerospace aluminum alloys, but exit-side defects associated with jet lag can degrade surface integrity and dimensional accuracy. This work investigates the influence of water pressure, abrasive mass flow rate, and traverse feed rate on the formation of jet-lag defects at the exit side of cuts in UNS A92024 aluminum alloy plates of 10 mm thickness. A full factorial 33 experimental design was implemented to manufacture 27 square samples (20 × 20 mm), which were subsequently characterized by optical microscopy at 20× magnification. The semicircular jet-lag defects were quantified using Imaging processing techniques to determine their projected area, and the resulting data were analyzed with multifactor ANOVA and multiple linear regression. The results show that traverse feed rate and water pressure have a statistically significant effect on defect area, with traverse feed rate being the most influential factor, whereas the abrasive mass flow rate plays a secondary role within the investigated range. Combinations of high water pressure and low traverse feed rate led to cleaner cuts with reduced exit-side damage, and contour plots allowed the identification of operational windows that minimize defect formation. The proposed methodology provides a systematic framework for characterizing jet-lag defects in AWJM and can be extended to other alloys, thicknesses, and advanced characterization techniques to support process optimization in industrial applications.es_ES
dc.formatapplication/pdfes_ES
dc.language.isoenges_ES
dc.publisherMDPIes_ES
dc.rightsAttribution 4.0 Internacional*
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/*
dc.sourceMetals 2026, vol. 16, n. 5, 475es_ES
dc.subjectabrasive waterjet machininges_ES
dc.subjectaluminum alloy 2024es_ES
dc.subjectjet lag defectes_ES
dc.subjectexit-side qualityes_ES
dc.subjectfactorial designes_ES
dc.subjectANOVAes_ES
dc.subjectimage analysises_ES
dc.titleInfluence of Cutting Parameters on Exit-Side Defects in Abrasive Waterjet Machining of UNS A92024 Aluminum Alloyes_ES
dc.typejournal articlees_ES
dc.rights.accessRightsopen accesses_ES
dc.identifier.doi10.3390/met16050475
dc.relation.projectIDinfo:eu-repo/grantAgreement/AEI//EQC2018-005131-Pes_ES
dc.type.hasVersionNAes_ES


Files in this item

This item appears in the following Collection(s)

Show simple item record

Attribution 4.0 Internacional
This work is under a Creative Commons License Attribution 4.0 Internacional