Show simple item record

dc.contributor.authorRosa Silva, Sergio de la 
dc.contributor.authorMayuet Ares, Pedro Francisco 
dc.contributor.authorPardo Vicente, Miguel Ángel 
dc.contributor.authorRodríguez Parada, María Lucía 
dc.contributor.otherIngeniería Mecánica y Diseño Industriales_ES
dc.date.accessioned2026-08-26T08:24:29Z
dc.date.available2026-08-26T08:24:29Z
dc.date.issued2023
dc.identifier.isbn978-3-031-15927-5
dc.identifier.isbn978-3-031-15928-2
dc.identifier.urihttp://hdl.handle.net/10498/40174
dc.description.abstractThe advantages of AM (Additive Manufacturing) to manufacture complex geometries and custom flexible structures (shape, density, geometry etc.) provides the possibility to use the elastic properties of different materials in order to obtain elastic profiles that could be adapted to a specific customized application. Recent studies established that manufacturing and geometrical parameters like unit cell size and topology, have a defined influence on the stiffness of complex structures like lattice structures, all due to the variation in the volume of material used. This highlights the possibility of designing elastic behavior of structures that could be implemented, for example, in rehabilitation programs which usually use elastic products with highly specific levels of resistance. Therefore, the objective of this works focuses on evaluating the use of the statistical treatment of the data as a guide to predict the behavior of the structures for the design of customized rehabilitation products. A case study based on the use of contour plots as a prediction tool have been carried out. Several TPU lattice specimens were modelled and tested by a simulation of a compression process using finite element analysis (FEA) tools. The reaction force against compression process of several lattice specimens were obtained, showing that the values were within the range of values predicted by the contour plot, validating the prediction. In the same way, the prediction capability with non-studied parameter values, and using a lower number of parameters at the same time were analysed, getting favourable results.es_ES
dc.formatapplication/pdfes_ES
dc.language.isoenges_ES
dc.publisherSpringer Naturees_ES
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 Internacional*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/*
dc.sourceEn: Gerbino, S., Lanzotti, A., Martorelli, M., Mirálbes Buil, R., Rizzi, C., Roucoules, L. (eds). Advances on Mechanics, Design Engineering and Manufacturing IV. JCM 2022. Lecture Notes in Mechanical Engineering. Springeres_ES
dc.titleInfluence of TPU Lattice Structures on Functional Properties for the Design of Customized Rehabilitation Productses_ES
dc.typebook partes_ES
dc.rights.accessRightsclosed accesses_ES
dc.identifier.doi/10.1007/978-3-031-15928-2_80
dc.type.hasVersionVoRes_ES


Files in this item

This item appears in the following Collection(s)

Show simple item record

Attribution-NonCommercial-NoDerivatives 4.0 Internacional
This work is under a Creative Commons License Attribution-NonCommercial-NoDerivatives 4.0 Internacional