Mostrar el registro sencillo del ítem

dc.contributor.authorFlores Gallegos, Sara 
dc.contributor.authorBraza Blanco, María Verónica 
dc.contributor.authorFernández de los Reyes, Daniel 
dc.contributor.authorBen Fernández, Teresa 
dc.contributor.authorGallego Carro, Alejandro
dc.contributor.authorSchwarz, Malte
dc.contributor.authorUlloa, Jose María
dc.contributor.authorGonzález Robledo, David 
dc.contributor.otherCiencia de los Materiales e Ingeniería Metalúrgica y Química Inorgánicaes_ES
dc.date.accessioned2026-10-29T14:05:09Z
dc.date.available2026-10-29T14:05:09Z
dc.date.issued2023-10-14
dc.identifier.issn1873-5584
dc.identifier.urihttp://hdl.handle.net/10498/40495
dc.description.abstractWe present a quantitative analysis of Sb segregation in ultrathin GaAsSb films (1–20 ML) grown with soaking/ desorption methods. Sb soaking advances Sb incorporation almost to the beginning of the growth, increasing the compositional gradient for all thicknesses. Application of the desorption step alone increases the compositional gradient at the upper interface by removing a fixed amount of Sb but erases layers thinner than 10 ML. When both methods are combined, the Sb balance changes with layer thickness. Thinner layers lose Sb while thicker layers gain Sb. The amount of Sb desorbed is related to the floating layer content at the time of desorption, which varies with thickness. Segregation simulations show that the segregation energy changes during layer growth, being initially higher but stabilizing around the same value for all cases. Sb-soaked samples reach the segregation steady state at a distance of 5 ML from the origin, much earlier than non-soaked samples (10–15 ML). The effect of desorption produces a large perturbation of the segregation steady state, which is much greater in the desorption-only sample than when combined with soaking. The combined effect of soaking and esorption gives the best GaAsSb films with steeper interfaces and no delay in onset.es_ES
dc.formatapplication/pdfes_ES
dc.language.isoenges_ES
dc.publisherElsevieres_ES
dc.sourceApplied Surface Science 644 (2024) 158676es_ES
dc.subjectGrowth interruptionses_ES
dc.subjectSegregationes_ES
dc.subjectIII-Sb alloyses_ES
dc.subjectSTEM analyseses_ES
dc.titleSb segregation in ultrathin GaAsSb layers: A quantitative analysis of soaking/desorption stages.es_ES
dc.typejournal articlees_ES
dc.rights.accessRightsclosed accesses_ES
dc.identifier.doi10.1016/j.apsusc.2023.158676
dc.relation.projectIDPID2022-136626OB-C33es_ES
dc.type.hasVersionAOes_ES


Ficheros en el ítem

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem