Show simple item record

dc.contributor.authorMoreno Vázquez, Leticia 
dc.contributor.authorMartín Rodríguez, María de la Luz 
dc.contributor.authorMatres Serrano, Victoria
dc.contributor.authorCórdoba, Tamara
dc.contributor.authorLópez, Javier
dc.contributor.authorAlmagro Bello, Juan F.
dc.contributor.authorSales Lérida, David 
dc.contributor.otherCiencia de los Materiales e Ingeniería Metalúrgica y Química Inorgánicaes_ES
dc.contributor.otherIngeniería Química y Tecnología de Alimentoses_ES
dc.date.accessioned2026-11-03T07:36:14Z
dc.date.available2026-11-03T07:36:14Z
dc.date.issued2026-07-01
dc.identifier.issn2624-5558
dc.identifier.urihttp://hdl.handle.net/10498/40526
dc.description.abstractPitting corrosion is particularly dangerous due to its localised nature, which can render materials unusable and cause catastrophic failures. It is important to characterise the material in regard to pitting corrosion resistance in order to improve material selection according to the conditions of the exposed environment. Electrochemical tests were carried out to assess pitting corrosion in austenitic stainless steel EN 1.4301. This study identifies the optimal experimental conditions to ensure reliability and reproducibility in electrochemical tests. The results demonstrate the influence of these parameters in evaluating the resistance of stainless steels to pitting corrosion. To ensure the reproducibility of the breakdown potential (Eb), deaeration was standardised using an N2 flow rate of 0.6–0.8 L/min for 20 min. Furthermore, mechanical agitation at 280 rpm was established as a necessary condition to homogenise the electrolyte and effectively renew the metal/solution interface. Finally, the water flow rate was set at a critical value of 7 mL/h, statistically identified as the most decisive parameter (p < 0.05). This optimisation mitigates crevice corrosion, ensuring that damage nucleation occurs exclusively via a pitting mechanism.es_ES
dc.formatapplication/pdfes_ES
dc.language.isoenges_ES
dc.publisherMDPIes_ES
dc.rightsAtribución-CompartirIgual 4.0 Internacional*
dc.rights.urihttp://creativecommons.org/licenses/by-sa/4.0/*
dc.sourceCorrosion and Materials Degradation. 2026; 7(3):41.es_ES
dc.subjectpitting corrosiones_ES
dc.subjectaustenitices_ES
dc.subjectparameterses_ES
dc.subjectelectrochemicales_ES
dc.subjectstainless steeles_ES
dc.subjectpotentiodynamices_ES
dc.titleOptimizing Potentiodynamic Pitting Corrosion Tests for Austenitic Stainless Steel: The Critical Role of Water Flowes_ES
dc.typejournal articlees_ES
dc.rights.accessRightsopen accesses_ES
dc.description.physDescpdf de 13 páginas más portadaes_ES
dc.identifier.doi10.3390/cmd7030041
dc.relation.projectIDinfo:eu-repo/grantAgreement/Junta de Andalucia//FEDER-UCA-2024-A1-48es_ES
dc.relation.projectIDinfo:eu-repo/grantAgreement/Junta de Andalucia//DGP_PIDI_2024_00743es_ES
dc.type.hasVersionVoRes_ES


Files in this item

This item appears in the following Collection(s)

Show simple item record

Atribución-CompartirIgual 4.0 Internacional
This work is under a Creative Commons License Atribución-CompartirIgual 4.0 Internacional