RT bachelor thesis T1 Diseño de una jaula flotante para el engorde del pescado en el golfo de Cádiz A1 Ivars Morales, Alejandro A2 Construcciones Navales AB I have designed a floating cage based on a trimaran ship model. The floating cagehas been built with naval steel, and it’s formed by four floats joined by a steelstructure. The weather deck is over this structure with a small control room in themiddle of the stern top. This deck allows workers to be able o operate with thekiddles, feeding the fish and controlling the ship with ample workspace.The floating cage has been designed to sail short distances and to operate nearthe coast with good weather. There are many studies which show floating cagessink into the Cádiz bay because of the winter storms, that’s why my cage wasdesigned to be used during spring and summer, between February andNovember.At the stern bottom it has two azimuth propellers, on per side, to propels thefloating cage. It’s not necessary to install a rudder because this kind of propulsioncan turn round by themselves, so the ship can maneuver easily too.For the size I have calculated the number of cubic meters needed to farm enoughfish, to make the floating cage efficient. The first factor is the OGD (OptimumGrowing Density) of the sort of fish we are going to farm. In these case, We aregoing to grow Sea Breann and Sea Bass, that has a OGD like 4Kg/m^3. Thesecond factor is the survival ratio of the fingerblings (baby fish). With these twofactors I have calculated the volume of water used to farm the fish, and thesevolume is used to sized the main dimensions. The four floats have to support theirown weigh, the weigh of the structure, the machinery, the joining structure, the firstfloor, the workers the fish the kiddles and the fish food. YR 2017 FD 2017-03-02 LK http://hdl.handle.net/10498/19146 UL http://hdl.handle.net/10498/19146 LA spa DS Repositorio Institucional de la Universidad de Cádiz RD 16-nov-2026