RT journal article T1 Microwave Permittivity of Trace sp² Carbon Impurities in Sub-Micron Diamond Powders A1 Cuenca, Jerome Alexander A1 Thomas, Evan A1 Mandal, Soumen A1 Morgan, David John A1 Lloret Vieira, Fernando Manuel A1 Araújo Gay, Daniel A1 Williams, Oliver Aneurin A1 Porch, Adrian A2 Ciencia de los Materiales e Ingeniería Metalúrgica y Química Inorgánica AB Microwave dielectric loss tangent measurementsare demonstrated as a method for quantifying tracesp2-hybridized carbon impurities in sub-micron diamondpowders. Appropriate test samples are prepared by vacuumannealing at temperatures from 600 to 1200 °C to vary thesp2/sp3 carbon ratio through partial surface graphitization.Microwave permittivity measurements are compared withthose obtained using X-ray photoelectron spectroscopy (XPS),Raman spectroscopy, and electron energy loss spectroscopy(EELS). The average particle size remains constant (verifiedby scanning electron microscopy) to decouple any geometricdielectric effects from the microwave measurements. Afterannealing, a small increase in sp2 carbon was identified fromthe XPS C 1s and Auger spectra, the EELS σ* peak in the C 1sspectra, and the D and G bands in Raman spectroscopy, although a quantifiable diamond to G-band peak ratio was unobtainable.Surface hydrogenation was also evidenced in the Raman and XPS O 1s data. Microwave cavity perturbation measurements showthat the dielectric loss tangent increases with increasing sp2 bonding, with the most pertinent finding being that these valuescorrelate with other measurements and that trace concentrations of sp2 carbon as small as 5% can be detected. PB ACS Publications SN 2470-1343 YR 2018 FD 2018 LK http://hdl.handle.net/10498/20911 UL http://hdl.handle.net/10498/20911 LA eng DS Repositorio Institucional de la Universidad de Cádiz RD 19-nov-2026