RT journal article
T1 Experimental estimation of the residual fatigue life of in-service wind turbine bolts
A1 Rincón Casado, Alejandro
A1 Juliá-Lerma, J.M.
A1 García-Vallejo, D.
A1 Domínguez, J.
A2 Ingeniería Mecánica y Diseño Industrial
K1 Bolted joints
K1 Fatigue life of bolted joints
K1 Residual fatigue life
K1 Wind turbine bolt
AB This study presents an experimental methodology aimed at estimating the residual fatigue life of in-service wind turbine bolts. The main objective is to assess the residual life of the bolts to plan their replacement and to avoid unexpected breakages of wind turbine blade connections. To develop the methodology, M16 bolts of quality 10.9 with controlled predamage were used, simulating in-service operating conditions. The fatigue tests were carried out taking care to place the nut at the point on the bolt that produces the highest damage at the same point where the predamage was performed. In addition, the influence of a possible angular positioning error on the residual fatigue life has been investigated. The residual fatigue life is estimated from the difference in fatigue life of new bolt tests and the fatigue life of predamaged bolt tests, simulating service conditions. Special care has been taken to guarantee that the most damaged zone of the bolt in service is also in the position that produces the highest damage during tests. An experimental procedure for determining the fatigue life of a new bolt from tests conducted on a bolt under the same operating conditions was developed. The developed methodology has been applied to M20 bolts belonging to real turbines in service.
PB ELSEVIER
SN 1350-6307
YR 2022
FD 2022-11
LK http://hdl.handle.net/10498/27973
UL http://hdl.handle.net/10498/27973
LA eng
DS Repositorio Institucional de la Universidad de Cádiz
RD 11-nov-2026