RT journal article T1 Characterization of pores in polished low temperature co-fired glass-ceramic composites for optimization of their micromachining A1 Bartsch, Heike A1 Lubov, Maksim A1 Kharlamov, Vladimir S. A1 Jiménez Ríos, Juan Jesús A2 Ciencia de los Materiales e Ingeniería Metalúrgica y Química Inorgánica K1 glass-ceramic composite K1 laser scanning microscopy K1 low temperature co-fired ceramics K1 LTCC K1 polishing K1 pore analysis K1 surface analysis AB Pores are intrinsic defects of ceramic composites and influence their functional properties significantly. Their characterization is therefore a pivotal task in material and process optimization. It is demonstrated that polished section analysis allows for obtaining precise information on pore size, shape, area fraction, and homogeneous distribution. It is proven that laser scanning microscopy provides accurate height maps and is thus an appropriate technique for assessing surface features. Such data is used to compare areas with good and poor polishing results, and various surface parameters are evaluated in terms of their informative value and data processing effort. The material under investigation is a low temperature co-fired ceramic composite. Through statistical analysis of the data, the inclination angle was identified as an appropriate parameter to describe the polishing result. By using masked data, direct conclusions can be drawn about the leveling of load-bearing surface areas, which are crucial in photolithographic processing steps and bonding technology. A broad discussion of different defects based on the results contributes to a critical analysis of the potentials and obstacles of micromachining of low temperature cofired ceramic substrates. PB Institute of Physics SN 2051-672X YR 2022 FD 2022-12-02 LK http://hdl.handle.net/10498/29675 UL http://hdl.handle.net/10498/29675 LA eng DS Repositorio Institucional de la Universidad de Cádiz RD 16-nov-2026