RT journal article
T1 Feasibility of utilization of recycled HDPE in manhole covers for urban traffic areas and industrial zones
A1 Suffo Pino, Miguel
A1 Brey Cabello, Manuel
A1 Orellana, J.P
A1 García Morales, José Luis
A2 Ingeniería Mecánica y Diseño Industrial
A2 Tecnologías del Medio Ambiente
K1 Coating
K1 Manhole covers
K1 Reaction to fire
K1 Recycled HDPE mixtures
K1 Stability under UV radiation
AB The consumption of plastic raw materials has been exponentially growing throughout the world in the last decade and so has, in the same proportion, their associated waste. Recycling through the mechanical treatment of the heavy fraction of these plastics is the most economic and the safest alternative to use this waste and to recirculate it for reuse within the same industry or for other related industries located near the place where the waste is generated. In this paper, a study of characterization and post-processing of recycled high density polyethylene received by a hazardous waste manager in southern Spain is presented, an area in which containers, Intermediate Bulk Containers, and drums, originally used for oil products from refineries and petrochemical industries nearby, are employed. These high density polyethylene materials are validated to meet the requirements of the harmonized standards to be used as self-supply in the production of manhole covers. EN 124–6:2015 standard allows the use of plastic materials such as PE or PP, even using material externally reprocessed, such as material derived from thermoplastic products that have not been previously used as lids or manhole covers. Class A-15 and B-125 of the standard are oriented for the construction of these types of elements to cover or close in certain urban spaces such as pedestrian areas, parking areas or multi-story car parks for vehicles. The study shows that the recycled material fully complies with the density; it keeps unalterable during fire test after application of the coating, there are no adverse effects on artificial ageing; the decrease of the average value of the tensile impact strength by 21.84%; and achieves 6 mm of maximum deflection against the test load Fp (45.3 MPa). Therefore, it can be considered a valid scenario for the effective use of solid plastic waste in products that make up part of the urban or industrial areas, as an example of complete circularity material and offers a valid alternative to the end-of-waste condition.
PB Elseiver
SN 0959-6526
YR 2023
FD 2023
LK http://hdl.handle.net/10498/31763
UL http://hdl.handle.net/10498/31763
LA eng
DS Repositorio Institucional de la Universidad de Cádiz
RD 10-nov-2026