RT conference output
T1 Preliminary study of PLA wire colour effects on geometric characteristics of parts manufactured by FDM
A1 Valerga Puerta, Ana Pilar
A1 Batista Ponce, Moisés
A1 Puyana, R.
A1 Sambruno Ladrón de Guevara, Alejandro
A1 Wendt, C.
A1 Marcos Bárcena, Mariano
A2 Ingeniería Mecánica y Diseño Industrial
K1 PLA
K1 FDM
K1 Additive Manufacturing
K1 Material Pigmentation
K1 Processing Temperature
K1 Geometry
AB Colour can specially imply deviations in dimensional tolerances of manufactured parts, requiring the availability of the benchmark to ensure that Additive Manufacturing (AM) processed parts comply with the required design features, especially geometric ones. This is caused by the differences in the colouring process and the colour additives to the polymer. This work reports on the results of the geometrical deviations on samples development in 3D printed Poly-Lactic Acid (PLA) polymer with different pigmentations using Fused Deposition Modelling (FDM). In parallel, a more detailed study has been carried out varying the work temperature in order to analyse the combined effect of both parameters subject to different temperatures and different AM paths in order to assess differences in the required AM conditions.
PB Elsevier
SN 2351-9789
YR 2017
FD 2017
LK http://hdl.handle.net/10498/36607
UL http://hdl.handle.net/10498/36607
LA eng
DS Repositorio Institucional de la Universidad de Cádiz
RD 06-nov-2026