RT journal article
T1 Study of the influence of copper reinforcement on the tribological properties of parts obtained by fused filament fabrication
T2 Estudio de la influencia del refuerzo de cobre en las propiedades tribológicas de piezas obtenidas mediante fabricacion por filamento fundido
A1 Batista Ponce, Moisés
A1 Salguero Gómez, Jorge
A1 Sol Illana, Irene del
A1 Ramírez-Peña, Magdalena
A1 Vázquez Martinez, Juan Manuel
A2 Ingeniería Mecánica y Diseño Industrial
K1 FFF
K1 Fused Filament Fabrication
K1 Polímero reforzado
K1 PLA
K1 Tribología
K1 Pin-on-disc
AB The excellent tribological properties of copper are well known, which is why it is commonly used in components whose tribological characteristics have a high impact. Thanks to the characteristics of Additive Manufacturing it is possible to manufacture parts incorporating copper particles. However, the main mechanical studies are related to performance undertensile-compression or bending conditions and the tribological properties are still little studied and this means that there is no knowledge of the possible performance of parts obtainedusing additive techniques with these particles. For this reason, this article proposes to carry out a study on a polymeric Additive Manufacturing process, specifically, Fused Filament Manufacturing, which is the most widely used process at present and where it is possible to obtain thermoplastic matrix filaments with different types of reinforcements. In this case, a reinforcement of metallic nature will be chosen, such as copper particles, where the properties of this material will be exploited. The aim is to find out how the basic manufacturing parameters, layer thickness and temperature, influence the tribological behaviour of the parts obtained with this process.
PB Publicaciones DYNA SL
SN 0012-7361
YR 2023
FD 2023
LK http://hdl.handle.net/10498/36766
UL http://hdl.handle.net/10498/36766
LA spa
DS Repositorio Institucional de la Universidad de Cádiz
RD 08-nov-2026