Deposition angle tunes low-temperature electronic transport in early transition metal thin films

Identificadores
URI: http://hdl.handle.net/10498/40615
DOI: 10.1016/J.MATDES.2026.116075
ISSN: 1873-4197
ISSN: 0264-1275
Ficheros
Estadísticas
Métricas y Citas
Metadatos
Mostrar el registro completo del ítemFecha
2026-04-25Departamento/s
Ciencia de los Materiales e Ingeniería Metalúrgica y Química InorgánicaFuente
Materials and Design, Vol. 266, 2026Resumen
Nine transition metals, namely, Ti, V, Cr, Zr, Nb, Mo, Hf, Ta, and W, are DC sputter-deposited by oblique angle deposition (OAD). The deposition angle α is gradually changed from 0 to 85° while keeping the films thickness at 400 nm. The electronic transport properties of these metallic nanocolumnar thin films are investigated by means of resistivity vs. temperature measurements from 7 to 300 K. Electron scattering phenomena by phonons, defects and electrons strongly depend on the nature of deposited metal, and deposition angle. Temperature-dependent models are applied as a function of the different electron interaction mechanisms. It is shown that the conventional Bloch-Grüneisen theory of bulk metals well explain the electronic transport properties of hcp metals. However, it cannot fit with the various evolutions of resistivity vs. temperature measurements of bcc thin films. A saturation effect in resistivity occurs for bcc metals when they are fabricated with the most glancing deposition angles (α ' 70°). A more complex behavior is also obtained for chromium thin films, which clearly illustrates the significant deviation from the Matthiessen’s rule due to the increasing number of growth-induced defects and voids favored by the OAD process.
Materias
Electron scattering; Oblique angle deposition; Resistivity; Temperature; Thin films; Transition metalsColecciones
- Artículos Científicos [12034]






