Adding value to natural clays as low‑cost adsorbents of methylene blue in polluted water through honeycomb monoliths manufacture

Identificadores
URI: http://hdl.handle.net/10498/22179
DOI: 10.1007/s42452-019-1636-4
ISSN: 2523-3963
ISSN: 2523-3971
Ficheros
Estadísticas
Métricas y Citas
Metadatos
Mostrar el registro completo del ítemFecha
2019-12Departamento/s
Ciencia de los Materiales e Ingeniería Metalúrgica y Química InorgánicaFuente
SN Applied Sciences (2019) 1:1595Resumen
natural Moroccan illite–smectite was used as an adsorbent for the removal of methylene blue (MB) from aqueous solutions.
The clay was characterized by FTIR spectroscopy, TGA, SEM–EDS, X-ray fluorescence, XRD and N2
physisorption. The
influence of pH, temperature and time on the MB adsorption by the clay was investigated. The maximum equilibrium
adsorption capacity was 100 mg g−1 at 45 °C. The kinetic behavior and the isotherms better-fitted with the pseudosecond-
order and Langmuir models, respectively. Clay honeycomb monoliths (50 cells cm−2) were obtained by means
of extrusion from the starting material without any additive except water. The structured filters exhibited better performance
under dynamic conditions than the powdered clay, adding value to the application of this low-cost adsorbent.
Materias
Adsorption; Clay; Honeycomb monolith; Methylene blueColecciones
- Artículos Científicos [12034]
- Articulos Científicos CC. Mat. [585]
- Artículos Científicos IMEYMAT [581]






