On the Relationship between Mechanical Properties and Crystallisation of Chemically Post-Processed Additive Manufactured Polylactic Acid Pieces

Abstract

Nowadays, improvement of the surface finish of parts manufactured by fused deposition modelling is a well-studied topic. Chemical post-treatments have proven to be the best technique in terms of time consumption and smoothness improvement. However, these treatments modify the structure of the material and, consequently, its mechanical properties. This relationship was studied in this work. In this case, on the basis of a previous study on crystallisation, polylactic acid pieces were subjected to different post-treatments to evaluate their effects on the sample's mechanical properties, i.e., tensile strength and hardness. Models were obtained according to their percentage of crystallisation, which was related to the different treatments, as well as immersion time. Dramatic changes were obtained within a wide range of material behaviour with some treatments. Specifically, changes were obtained in the maximum stress (from 55 to 20 MPa), in elongation (from 3% to 260%), and in the hardness scale (Shore D to A).