3D-printing of metallic honeycomb monoliths as a doorway to a new generation of catalytic devices: the Ni-based catalysts in methane dry reforming showcase

Identificadores
URI: http://hdl.handle.net/10498/24106
DOI: 10.1016/j.catcom.2020.106181
ISSN: 1566-7367
ISSN: 1873-3905 (internet)
Ficheros
Estadísticas
Métricas y Citas
Metadatos
Mostrar el registro completo del ítemFecha
2021-06Departamento/s
Ciencia de los Materiales e Ingeniería Metalúrgica y Química InorgánicaFuente
Catalysis Communications 148 (2021) 106181Resumen
Stainless-steel honeycomb monoliths (square cell-shape/230 cpsi cylinders) were 3D-printed and used as support of a Ni/CeO2-ZrO2 powder deposited by washcoating. The resulting catalysts were characterized by XRF, SEM-EDX and H-2-TPR, and tested in the dry reforming of methane reaction. In the 750-900 degrees C range, they showed competitive conversions (45-95%) and H-2/CO ratio (0.84-0.94) compared to cordierite honeycombs with same catalyst loading and geometric characteristics, but did not require activation time thanks to better heat transfer. Both structured catalysts were stable in prolonged TOS experiments. The bare metallic monoliths exhibited significant activity at 900 degrees C due to their intrinsic nickel content.
Materias
3D-printing; Stainless-steel honeycomb; Nickel; Ceria-Zirconia; Dry reforming of methaneColecciones
- Artículos Científicos [12077]
- Articulos Científicos CC. Mat. [585]
- Artículos Científicos IMEYMAT [581]






