Quantifying phase transformation during the manufacturing process of AISI 430 ferritic stainless steel

Thumbnail
Identificadores

URI: http://hdl.handle.net/10498/24593

DOI: 10.1088/1757-899X/891/1/012007

ISSN: 1757-8981

Ficheros
Estadísticas
Métricas y Citas
 
Compartir
Exportar a
EndNoteBibTexRIS
Metadatos
Mostrar el registro completo del ítem
Autor/es
Collado, Irene; Núñez Galindo, A.; Ruiz, A.; Almagro Bello, Juan F.; Botana Pedemonte, Francisco JavierAutoridad UCA
Fecha
2020
Departamento/s
Ciencia de los Materiales e Ingeniería Metalúrgica y Química Inorgánica
Fuente
IOP Conf. Ser.: Mater. Sci. Eng.891 012007
Resumen
The effect of ferrite to austenite transformation phenomenon on microstructure and annealing performance of AISI 430 (EN 1.4016) ferritic stainless steel 16%Cr-0.04%C and 17%Cr-0.02%C was studied by electron backscatter diffraction and X-ray diffraction. Hot-rolled and annealed specimens of each ferritic stainless steel were collected from manufacturing route, where different states were analysed. Chemical composition shift of AISI 430 is correlated to microstructural behaviour of each material, while annealing temperature impact over grain growth phenomena is discussed.
Colecciones
Atribución 4.0 Internacional
Esta obra está bajo una Licencia Creative Commons Atribución 4.0 Internacional