• español
    • English
  • Login
  • español 
    • español
    • English

UniversidaddeCádiz

Área de Biblioteca, Archivo y Publicaciones
Comunidades y colecciones
Ver ítem 
  •   RODIN Principal
  • Producción Científica
  • Artículos Científicos
  • Ver ítem
  •   RODIN Principal
  • Producción Científica
  • Artículos Científicos
  • Ver ítem
JavaScript is disabled for your browser. Some features of this site may not work without it.

Sherry wine industry by-product as potential biosorbent for the removal of Cr(VI) from aqueous medium

Thumbnail
Identificadores

URI: http://hdl.handle.net/10498/25806

DOI: 10.1007/s13399-021-02053-0

ISSN: 2190-6815

ISSN: 2190-6823 (internet)

Ficheros
s13399-021-02053-0.pdf (2.539Mb)
Estadísticas
Ver estadísticas
Métricas y Citas
 
Compartir
Exportar a
Exportar a MendeleyRefworksEndNoteBibTexRIS
Metadatos
Mostrar el registro completo del ítem
Autor/es
Sánchez Ponce, Lorena; Granado Castro, María DoloresAutoridad UCA; Casanueva Marenco, María JoséAutoridad UCA; Galindo Riaño, María DoloresAutoridad UCA; Díaz de Alba, Margarita IsabelAutoridad UCA
Fecha
2023
Departamento/s
Química Analítica
Fuente
Biomass Conversion and Biorefinery - 2023, Vol. 13 pp. 12489–12507
Resumen
A low-cost biosorbent obtained from the Palomino Fino grape seed, a Sherry wine industry by-product, has been proposed as a way of valorising this material. The biomass was characterised obtaining values of 0.68 +/- 0.05 g mL(-1) for bulk density, 1.02 +/- 0.09 g mL(-1) for apparent density and 33.3% for porosity. The pH(pzc) was 5.2 and the surface negative charge value was 2.4 +/- 0.2 mmol g(-1). The analysis of surface morphology showed differences due to the sorption. The results showed a promising potential for chromium(VI) removal from aqueous solutions. The studies were carried out in batch scale and a 2(3) factorial design was applied for the optimisation of the process. A percentage of 91.7 +/- 0.6% was achieved for the biosorption of Cr(VI) under optimal conditions using pH 5.5, 15 g/L of biosorbent and 8 h of contact time. The biosorption capacity showed a remarkable linearity from 0 to 2 mmol L-1 Cr(VI) and a precision of 0.64% for the removal of 1 mmol L-1 of metal. Langmuir, Freundlich and Temkin isotherm equations and the parameters of six kinetic models were used in the equilibrium modelling and identifying the mechanism of the biosorption. The combination of physical and chemical sorption mechanisms was proposed for the chromium removal with a high maximum sorption capacity (q(max) = 208.3 mg g(-1)). Thermodynamic parameters indicated the spontaneous and endothermic nature of the chromium removal. The successful biosorption was based on the special grape seed components with a relevant content in antioxidant and lignocellulosic compounds.
Materias
Chromium(VI) removal; Biosorption; Agricultural by-product; Grape seed; Non-living biomass
Colecciones
  • Artículos Científicos [12077]
  • Artículos Científicos INBIO [422]
  • Articulos Científicos Quim. Ana. [399]
Atribución 4.0 Internacional
Esta obra está bajo una Licencia Creative Commons Atribución 4.0 Internacional

Listar

Todo RODINComunidades y ColeccionesPor fecha de publicaciónAutoresTítulosMateriasEsta colecciónPor fecha de publicaciónAutoresTítulosMaterias

Mi cuenta

AccederRegistro

Estadísticas

Ver Estadísticas de uso

Información adicional

Acerca de...Deposita en RODINPolíticasNormativasDerechos de autorEnlaces de interésEstadísticasNovedadesPreguntas frecuentes

RODIN está accesible a través de

OpenAIREOAIsterRecolectaHispanaEuropeanaBaseDARTOATDGoogle Académico

Enlaces de interés

Sherpa/RomeoDulcineaROAROpenDOARCreative CommonsORCID

RODIN está gestionado por el Área de Biblioteca, Archivo y Publicaciones de la Universidad de Cádiz

ContactoSugerenciasAtención al Usuario